Overview
The Pro Comp 2.5 inch PRO-VST Rear Shock, part number 51054BX-2, is a gas-charged monotube rear shock for the 2019-2026 Chevrolet Silverado 1500. It fits the Silverado 1500, including the 1500 LD model in 2019 and the 1500 LTD model in 2022. The shock is a rear unit, so it replaces the rear shocks on those trucks.
The PRO-VST is built for hard off-road use. The 2.5-inch body gives the shock more damping capacity, and its hard-anodized, thick-wall impact forged body reduces friction and bore wear inside the shock. It is designed to hold up to off-road abuse while keeping damping performance over time.
Pro Comp says Vehicle Specific Tuning (VST) lets the shock give strong ride quality on the road and strong performance off road. The PRO-VST shaft is 17-4 PH stainless steel, chrome plated for corrosion and abrasion resistance.
Key features
- 2.5-inch body with a larger damping capacity
- Monotube design with gas charge
- Hard-anodized, thick-wall impact forged body
- 17-4 PH stainless steel shaft, chrome plated
- Vehicle Specific Tuning for each application
Before replacing rear shocks
Rear shocks do more than control bounce. They keep the tires in contact with the ground over washboard, ruts and rock, and they manage the weight shift that happens under braking. Worn rear shocks often show up as a floaty or bouncy rear end, uneven rear tire wear, or a truck that sits lower on one side. Checking for oil on the shock body and listening for knocks at the mounts are quick first steps.
Most owners replace shocks in pairs on the same axle so the ride and handling stay even. While the truck is raised, inspect the upper and lower mounts and bushings, since worn bushings can make a new shock feel loose. Owners running lift or leveling kits should confirm the shock length and mounting positions suit their suspension height before buying.
- Check both rear shocks for leaks or oil residue
- Inspect mounting bushings and hardware
- Replace in pairs for even damping
- Recheck mount hardware after the first few drives
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 51054BX-2 |
| Shock series | PRO-VST |
| Shock type | Monotube, gas charged |
| Body diameter | 2.5 inches |
| Shaft | 17-4 PH stainless steel, chrome plated |
| Position | Rear |
| Fitment type | Direct fit |
Vehicle fitment
It is a direct fit for the 2019 to 2026 Chevrolet Silverado 1500, including the 2019 Silverado 1500 LD and the 2022 Silverado 1500 LTD. It covers the Silverado 1500 trim levels. Earlier Silverado generations and the 2500 HD and 3500 HD models are not covered. Confirm your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.

















