Overview
The Pro Comp Suspension 57012BX-1 is a 2.5-inch PRO-VST front coilover shock for the 2007 to 2021 Toyota Tundra. The PRO-VST line is built for rough terrain and is tuned to each vehicle it is sold for.
The body is a thick wall, impact forged design that is hard-anodized to reduce friction and wear. The shaft is 17-4 PH stainless steel, precipitation hardened and chrome plated.
Key features
- Hard-anodized impact forged body
- 17-4 PH stainless steel shaft, chrome plated
- Vehicle specific tuning
- 2.5-inch body for high damping capacity
Front shock upkeep
Front shocks do most of their work on rough ground, so the damper body and shaft take regular abuse from dust, water and road debris. Wipe the shaft after off-road use and check for pitting or scratches that could damage the seal. A clean shaft helps the seal last and keeps the damper moving smoothly.
The bushings and mounts at the top of a coilover are a common wear point. Look for cracked rubber or loose hardware after a few weeks of driving, and retighten fasteners to the torque in the service manual. If the truck pulls or the ride feels floaty, the shock may need inspection or replacement, along with any worn bushings nearby.
- Wipe the shaft after dusty trips
- Check top mount bushings for cracks
- Inspect the spring seat for wear
- Listen for knocks over bumps
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 57012BX-1 |
| Shock series | PRO-VST |
| Position | Front |
| Shock type | Coilover |
| Body diameter | 2.5 in |
| Shaft | 17-4 PH stainless steel, chrome plated |
| Charge | Gas charged |
Vehicle fitment
The fit covers the 2007 to 2021 Toyota Tundra, with trims such as Base, SR5, Limited, Platinum and TRD Pro.
Check fit for other Toyota trucks and the 4Runner against your vehicle’s year, model and trim before ordering.
Installation notes
A coilover puts the spring and the damper in one assembly, so the installed length and spring seat position determine the ride height at the front. Measure the shock you are replacing before ordering, and confirm the front position on the Tundra. After installation, check that the coilover has clearance from the frame and the tire through the full suspension travel.
Set the ride height with the truck loaded the way you normally drive it, then confirm the coilover body clears the tire and the frame at full steering lock. Check the damper shaft for smooth movement before the truck is taken onto rough ground.
What’s included
One front coilover shock under part number 57012BX-1.


















