Select your vehicle
-13%

Pro Comp PRO-X Twin Tube Shock Absorber – 917510B

Pro Comp Suspension

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Pro Comp PRO-X twin tube front shock, part 917510B, with a 17.55 inch extended length
  • Gas charged, with 10 stage velocity sensitive valving
  • Stem upper mount and loop lower mount
  • Fits 1986 to 1995 Toyota Pickup models

Description

Overview

The Pro Comp PRO-X 917510B is a gas charged twin tube front shock with a 17.55 inch extended length and an 11.05 inch collapsed length. It fits 1986–1995 Toyota Pickup models in the Base, Base Turbo, DLX, SR5 and SR5 Turbo trims.

Pro Comp designed the PRO-X line for vehicles that see mostly paved roads with some off-road use. Its general-purpose twin tube design, with 10 stage velocity sensitive valving, is meant to improve handling across different road conditions while still giving a comfortable highway ride.

The shaft is 5/8 inch chrome hardened, and the piston is a 1-3/8 inch nylon banded design with a Teflon rebound stop. Pro Comp says these parts are built for demanding driving conditions.

This is a front unit with a 2.0 inch body diameter. Because position matters as much as length, make sure the front mount points match the shock you are replacing.

Key features

  • Gas charged, nitrogen stabilized twin tube body
  • 10 stage velocity sensitive valving
  • 1-3/8 inch nylon banded piston
  • 5/8 inch chrome hardened shaft
  • Teflon rebound stop
  • Black powder coat finish
  • Stem upper mount and loop lower mount

Choosing front shocks

Front shocks carry much of the steering and braking load, so their condition affects how the truck tracks and how quickly the front end settles after a bump. Matching the damping on both front positions is the simplest way to keep the front end predictable, and many owners replace the pair at the same time.

Before installing, look at the upper and lower mounts on the vehicle. A worn bushing or bent bracket can throw off the new shock’s action and cause early wear. After fitting, have the alignment checked, since front geometry can shift when components change.

  • Replace front shocks in pairs
  • Check steering components for play
  • Inspect upper and lower mounts before fitting
  • Recheck alignment after the swap

Specifications

Brand Pro Comp Suspension
Part number 917510B
Shock series PRO-X
Shock type Twin tube, gas charged
Location Front
Extended length 17.55 inches
Collapsed length 11.05 inches
Travel 6.50 inches
Body diameter 2.0 inches
Upper mount Stem
Lower mount Loop
Piston 1-3/8 inch nylon banded
Shaft 5/8 inch chrome hardened
Finish Black powder coat

Vehicle fitment

Fits 1986–1995 Toyota Pickup models, including the Base, Base Turbo, DLX, SR5 and SR5 Turbo trims. Toyota trucks outside those years are not covered by this fit.

The lower mount is a loop. Confirm that the mount type on your existing shock matches before ordering, and confirm fit for your vehicle’s year, model and trim.

Installation notes

Compare the 17.55 inch extended and 11.05 inch collapsed lengths with the shock you are replacing, and check the lower mount type before ordering.

What’s included

One shock, sold individually. Shock boots are sold separately.

Fitment

VehicleYearsTrims
Toyota Pickup1986–1995Base, Base Turbo, DLX, SR5, SR5 Turbo

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

What are the extended and collapsed lengths of the Pro Comp 917510B?

The shock is 17.55 inches extended and 11.05 inches collapsed, with 6.50 inches of travel. It is a front shock with a stem upper mount.

Which Toyota trucks does the 917510B fit?

It fits 1986–1995 Toyota Pickup models, including the Base, Base Turbo, DLX, SR5 and SR5 Turbo trims. Toyota trucks outside those years are not covered by this fit. Confirm your vehicle's year, model and trim before ordering.

Are shock boots included with the 917510B?

No. The shock is sold individually, and shock boots are sold separately. Check the lower mount type against your existing shock before ordering.

Should front shocks be replaced in pairs?

Yes, in most cases. Replacing both front shocks together keeps damping even across the axle, which helps steering stay predictable. Inspect the upper and lower mounts on both sides at the same time, since worn bushings can make a new shock feel loose.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon