Overview
The EXP51053BX-2 is a rear 2.5 inch PRO-VST monotube shock. It fits 2020–2026 Chevrolet Silverado 2500 HD models.
The hard-anodized, impact forged body measures 2.5 inches across, which supports greater damping capacity. Hard anodizing limits friction and bore wear inside the body.
The shaft is 17-4 PH stainless steel, precipitation hardened and chrome plated for corrosion and abrasion resistance. Vehicle Specific Tuning suits both on-road ride and off-road performance. It is a rear position shock and does not replace a front shock.
A monotube shock uses one main tube, with the piston moving inside it and a floating piston separating the oil from the gas charge. That layout generally handles heat better than a twin tube design, which is why monotube shocks are common on trucks used hard off-road. The 2.5 inch body is the main tube diameter, so the damping capacity depends on the size of that tube.
Key features
- 2.5 inch body diameter
- Monotube, gas charged
- Hard-anodized, impact forged body
- 17-4 PH stainless steel shaft, chrome plated
- Vehicle Specific Tuning, per the manufacturer
Rear shock replacement tips
Rear shocks carry much of the load when a Silverado is towing or hauling, so a worn unit can show up as a rough ride over bumps, rear end bounce or reduced control on uneven pavement. Replacing the rear shocks as a pair keeps the back of the truck balanced in damping.
Before ordering, confirm the position is rear and that the mounting eyes match your truck’s axle and frame. Monotube designs handle heat well under sustained loads, which is one reason they are common on work trucks. Upper and lower mounting bushings should be inspected at the same time because worn bushings change how the shock loads.
Check the shaft for oil film, dents or pitting, and look for leaks at the seal after a few hundred miles. Re-check the mounting bolts after the first drives, since a loose fastener alters damping.
- Confirm rear position before ordering
- Inspect bushings when replacing
- Check mounting bolts after first drives
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | EXP51053BX-2 |
| Series | PRO-VST |
| Position | Rear |
| Shock type | Monotube |
| Body diameter | 2.5 inch |
| Charge | Gas charged |
| Body | Hard-anodized, impact forged |
| Shaft | 17-4 PH stainless steel, chrome plated |
Vehicle fitment
It fits 2020–2026 Chevrolet Silverado 2500 HD models.
Other Silverado years and models are not on the list. Confirm your vehicle’s year, model and trim before ordering.
What’s included
Rear monotube shock. Check the package contents against your installation before starting.

















