Overview
The Pro Comp 919510B is a PRO-X twin tube shock absorber for the 1980–1996 Ford Bronco and F-150 and the 1984–1990 Ford Bronco II, with an entry for the 1993–1995 F-150 Lightning. It has a 19.7-inch extended length, a 12.0-inch collapsed length and 7.87 inches of travel.
The PRO-X is a general-purpose twin tube design for vehicles that are mostly driven on pavement with occasional off-road use. Its 10-stage velocity sensitive valving handles a range of road conditions, and the 1-3/8-inch nylon banded piston and 5/8-inch chrome hardened shaft make up the main working parts of the shock.
The upper mount is a stem and the lower mount a loop, on a 2.0-inch body finished in black powder coat. It is nitrogen stabilized, and the optional shock boot is not included with it.
Key features
- Twin tube design for general-purpose use
- 10-stage velocity sensitive valving
- 1-3/8-inch nylon banded piston
- 5/8-inch chrome hardened shaft
- Nitrogen stabilized
- Black powder-coated finish
Bronco and F-150 upgrades
Full-size Broncos and F-150s with long springs or leveling kits change the working length of a shock, so measuring the installed ride height matters more than matching the catalog number. Stem upper mounts and loop lower mounts are common on these trucks, and the bracket layout can vary across the years. Check the eye size and stud position before ordering.
Bronco II and older F-series pickups often have worn shock bushings, leaking seals and cracked rubber boots. When one shock wears out, the opposite shock on the same axle usually has similar wear. Replacing both keeps the ride steady and reduces the chance of uneven tire wear.
- Measure ride height before buying
- Check brackets for rust
- Replace shocks in pairs
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 919510B |
| Shock series | PRO-X |
| Shock type | Twin tube, gas charged (nitrogen stabilized) |
| Location | Universal |
| Extended length | 19.7 in |
| Collapsed length | 12.0 in |
| Travel length | 7.87 in |
| Body diameter | 2.0 in |
| Piston | 1-3/8 in nylon banded |
| Shaft | 5/8 in chrome hardened |
| Upper mount | Stem |
| Lower mount | Loop |
| Finish | Black powder coat |
| Boot | Optional, not included |
Vehicle fitment
It fits the 1980–1996 Ford Bronco in the Custom, Eddie Bauer, Ranger XLT, XL, XLS, XLT, XLT Lariat, XLT Nite and XLT Sport trims, the 1984–1990 Bronco II in several trims, the 1980–1996 F-150 in several trims, and the 1993–1995 F-150 Lightning.
Bronco and F-150 models from 1997 onward, and the 1991 and later Bronco II, are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The stem upper mount and loop lower mount should be checked against the existing bracket, and the 19.7-inch extended length should be compared with your installed ride height. Because the list covers both the Bronco and the Bronco II, confirm the mounting points before ordering.
What’s included
One twin tube shock with a stem upper mount and loop lower mount. The optional boot is not included.
Not included: the optional boot only.









