Overview
The Pro Comp 915551B is a PRO-X front twin tube shock absorber for Chevrolet and GMC trucks, with entries for the Silverado and Sierra 2500 and 3500 models, the 2002–2006 1500 pickups, the Avalanche, and the Suburban and Yukon XL 2500s. It has a 15.7-inch extended length, a 10.0-inch collapsed length and 5.50 inches of travel.
The PRO-X is a general-purpose twin tube shock built for trucks that see mainly paved roads with the occasional off-road trip. Its 10-stage velocity sensitive valving is designed to handle varied road conditions, and the 1-3/8-inch nylon banded piston and 5/8-inch chrome hardened shaft are the same as the rest of the PRO-X line.
The front shock has a stem upper mount and a loop lower mount, a 2.0-inch body and a black powder-coated finish. It is nitrogen stabilized, and the shock boot is sold as an optional extra that is not included.
Key features
- Twin tube design for general-purpose use
- 10-stage velocity sensitive valving
- 1-3/8-inch nylon banded piston
- 5/8-inch chrome hardened shaft
- Nitrogen stabilized
- Black powder-coated finish
Front shock considerations
Front shocks do real work beyond ride comfort. They help control the front end over bumps, limit dive under braking and keep the steering feeling settled at highway speed. On a 4×4 with a heavy front axle, the shock sees high loads each time a wheel drops into a rut, so wear shows up quickly as wandering or a loose feel.
Stem upper mounts and loop lower mounts put the shock under different stresses than all-loop setups, so check the bushings and studs before assuming the old hardware will transfer. Replacing one front shock without the other can leave the truck pulling to one side, so pairs are the safer choice. Inspect the ball joints and tie rod ends at the same time, since loose steering parts can make a new shock feel worse than expected.
- Check the stem mount threads and nut tightness after installation
- Inspect the loop lower bushing for cracks or flattening
- Test damping by bouncing each front corner before driving
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 915551B |
| Shock series | PRO-X |
| Shock type | Twin tube, gas charged (nitrogen stabilized) |
| Position | Front |
| Extended length | 15.7 in |
| Collapsed length | 10.0 in |
| Travel length | 5.50 in |
| Body diameter | 2.0 in |
| Piston | 1-3/8 in nylon banded |
| Shaft | 5/8 in chrome hardened |
| Upper mount | Stem |
| Lower mount | Loop |
| Finish | Black powder coat |
| Boot | Optional, not included |
Vehicle fitment
The shock fits the 2002–2006 Chevrolet Avalanche 2500, the 2002–2006 Silverado 1500, the 2001–2003 and 2005–2006 Silverado 1500 HD, the 1999–2004 Silverado 2500, the 2001–2010 Silverado 2500 HD, the 2001–2006 Silverado 3500 and the 2007–2010 Silverado 3500 HD. GMC Sierra models cover the same model ranges, along with the 2000–2013 Suburban and Yukon XL 2500.
Model years after 2013 and the 1500 pickups from 2007 onward are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The 15.7-inch extended and 10.0-inch collapsed lengths apply to the front position. Check the stem upper mount and the loop lower mount against the existing bracket before installing, because the shock is listed across many different trucks.
What’s included
One front twin tube shock with a stem upper mount and loop lower mount. The optional shock boot is not included.
Not included: the optional boot and mounting hardware.









