Overview
The Pro Comp 924506B is a PRO-X twin tube shock absorber for the 1979–1995 Toyota Pickup, in the Base, Base Turbo, DLX, DLX Turbo, SR5 and SR5 Turbo trims. It has a 24.9-inch extended length, a 14.8-inch collapsed length and a 10.05-inch travel length.
The PRO-X is a general-purpose twin tube shock for trucks that see mostly pavement with some off-road use. Its 10-stage velocity sensitive valving is meant to give a comfortable ride on varied road surfaces, and the 1-3/8-inch nylon banded piston with a 5/8-inch chrome hardened shaft make up the main working parts.
Both mounts are loop eyes, and the 2.0-inch body is finished in black powder coat. The shock is nitrogen stabilized, and the optional shock boot is sold apart from the shock.
Key features
- Twin tube design for general-purpose use
- 10-stage velocity sensitive valving
- 1-3/8-inch nylon banded piston
- 5/8-inch chrome hardened shaft
- Loop eyes at both ends
- Black powder-coated finish
Older pickups and clearance
Pickups from this generation have a simple leaf spring rear and a long shock stroke, so the damper does more of the work on rough back roads than on modern trucks. A twin tube design with a nitrogen charge keeps damping steady as the oil warms, which matters on long grades. Older rubber bushings may have settled, so measure the mounted length of the existing shock before buying.
Frame rust near the mounting points is common on these trucks, and a shock mount that has been welded or repaired should be checked before the new shock goes on. Look for worn bushings, bent eyes and oil on the body during inspection. On a truck with a leaf spring rear, check the axle bracket and bolts at the same time, since they carry the same loads.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 924506B |
| Shock series | PRO-X |
| Shock type | Twin tube, gas charged (nitrogen stabilized) |
| Location | Universal |
| Extended length | 24.9 in |
| Collapsed length | 14.8 in |
| Travel length | 10.05 in |
| Body diameter | 2.0 in |
| Piston | 1-3/8 in nylon banded |
| Shaft | 5/8 in chrome hardened |
| Upper mount | Loop |
| Lower mount | Loop |
| Finish | Black powder coat |
| Boot | Optional, not included |
Vehicle fitment
It fits the 1979–1995 Toyota Pickup in the Base, Base Turbo, DLX, DLX Turbo, SR5 and SR5 Turbo trims. It covers the full run of model years for this pickup generation, from 1979 through 1995.
Toyota Pickup models from 1996 onward and the 4Runner are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check the loop eyes on both ends against the existing bracket before installation, and compare the 24.9-inch extended length with the installed suspension height. Confirm the shock clears the frame at full compression.
What’s included
The shock is a twin tube unit with loop eyes at each end. The optional boot is not included.
Not included: the optional boot.









