Overview
The Pro Comp Suspension 51053BX-1 is a 2.5-inch PRO-VST front monotube shock for the 2020 to 2026 Chevrolet Silverado 2500 HD. It is built for off-road use and tuned to the vehicle it fits.
The body is hard-anodized and impact forged with thick walls, which Pro Comp says allows more damping capacity. The shaft is 17-4 PH stainless steel, chrome plated for corrosion and abrasion resistance.
Key features
- Monotube design
- Hard-anodized, thick wall impact forged body
- 17-4 PH stainless steel shaft, chrome plated
- Vehicle specific tuning
Heavy duty front shock care
Heavy duty trucks put more load on front shocks, especially when towing or carrying a plow or camper. Monotube designs keep the damping fluid in one tube, which many owners pick for consistent feel under heavy use. Check that the shock’s upper and lower mounts stay tight, since added weight loosens hardware faster than light use.
Recheck the front shocks after the first few heavy trips, and look for seepage at the shaft seal. A worn bushing or a bent mount can change the angle of the shock and cause uneven wear. Pair shock inspection with a look at the front tires, since irregular wear often points to suspension issues.
- Check mounts after loaded trips
- Look for oil at the shaft seal
- Compare tire wear on both sides
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 51053BX-1 |
| Shock series | PRO-VST |
| Position | Front |
| Shock type | Monotube |
| Body diameter | 2.5 in |
| Shaft | 17-4 PH stainless steel, chrome plated |
| Charge | Gas charged |
Vehicle fitment
It fits the 2020 to 2026 Chevrolet Silverado 2500 HD, in several trims.
Confirm fit for the Silverado 1500 and earlier model years against your vehicle’s year, model and trim before ordering.
Installation notes
Because this is a front monotube for a heavy duty truck, the installed length sets ride height and suspension travel. Measure the shock you are replacing and compare it with the new unit before lowering the truck onto its wheels. Check the front position against the vehicle before fitting.
A front coilover on a heavy duty truck carries more weight than a light duty shock, so check the spring seat and the mounting bolts after the first drive. The shaft should move smoothly with no binding, and the body should have clearance from the axle and steering components through full travel.
What’s included
One front monotube shock under part number 51053BX-1.
















