Overview
The Pro Comp 926506B is a PRO-X twin tube shock absorber with a 27.1-inch extended length, a 15.9-inch collapsed length and an 11.190-inch travel length. It fits the 1986–1989 Toyota 4Runner in the DLX and SR5 trims, the 1986–1995 Toyota Pickup in several trims, and the 1995–2004 Toyota Tacoma in several trims including the Pre Runner and SR5.
The PRO-X is a general-purpose twin tube design for trucks and SUVs that are mostly driven on pavement, with occasional off-road use. Its 10-stage velocity sensitive valving is designed for a range of road conditions, and the 1-3/8-inch nylon banded piston and 5/8-inch chrome hardened shaft are the main working parts.
Both mounts are loop eyes, which keeps the attachment simple to match to an existing bracket. The body is 2.0 inches in diameter with a black powder-coated finish, and the gas charge is nitrogen stabilized. The optional shock boot is not included.
Key features
- Twin tube design for general-purpose use
- 10-stage velocity sensitive valving
- 1-3/8-inch nylon banded piston
- 5/8-inch chrome hardened shaft
- Loop eyes at both ends
- Black powder-coated finish
Ride height and long travel
Long-travel shocks give the suspension more room to cycle, which matters on trucks that carry rough roads and occasional trails. Extra travel is only useful when the suspension can use it, so the shock’s extended length must clear the installed springs and bump stops at the top of the stroke. A shock that is too long can bind, and one that is too short can run out of travel.
Working the numbers starts with the existing shock. Measure eye to eye with the truck at normal height, then compare that figure against the extended and collapsed lengths of the new unit. Ride height changes from tires or suspension lifts also shift this relationship, so measure again after any change. Check that the brake lines and wiring have room at full compression.
- Measure the old shock eye to eye at normal height
- Check clearance with the bump stops at full compression
- Recheck after changing tire size or ride height
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 926506B |
| Shock series | PRO-X |
| Shock type | Twin tube, gas charged (nitrogen stabilized) |
| Location | Universal |
| Extended length | 27.1 in |
| Collapsed length | 15.9 in |
| Travel length | 11.190 in |
| Body diameter | 2.0 in |
| Piston | 1-3/8 in nylon banded |
| Shaft | 5/8 in chrome hardened |
| Upper mount | Loop |
| Lower mount | Loop |
| Finish | Black powder coat |
| Boot | Optional, not included |
Vehicle fitment
It fits the 1986–1989 Toyota 4Runner in the DLX and SR5 trims, and the 1986–1995 Toyota Pickup in the Base, Base Turbo, DLX, SR5 and SR5 Turbo trims. It also fits the 1995–2004 Toyota Tacoma in the Base, DLX, Limited, Pre Runner, S-Runner and SR5 trims.
The 4Runner from 1990 onward, and Tacoma models from 2005 onward, are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The 27.1-inch extended and 15.9-inch collapsed lengths are longer than many shocks in this range, so check the installed ride height before ordering. Loop eyes at both ends should be compared with the existing bracket for your truck or SUV.
What’s included
Each end of this twin tube shock is a loop eye. The optional boot is sold on its own.
Not included: the optional boot.









