Select your vehicle
-13%

Pro Comp PRO-M Monotube Rear Shock Absorber – PR2113

Pro Comp Suspension

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Pro Comp PRO-M monotube rear shock, part number PR2113
  • Fits 2014–2021 Ram 2500 and 2014 Ram 3500
  • Nitrogen gas charged with a floating piston and multi-stage valving
  • Extended length 24.4 inches, compressed length 16.1 inches
  • Polyurethane shock boot included

Description

Overview

The Pro Comp PRO-M rear monotube shock absorber, part number PR2113, fits the 2014–2021 Ram 2500 and the 2014 Ram 3500. It is nitrogen gas charged, with an extended length of 24.4 inches and a compressed length of 16.1 inches.

The PRO-M uses an internal floating piston to separate the oil from the nitrogen gas charge, which Pro Comp says prevents cavitation that would reduce performance. Multi-stage valving is tuned for each application, and the 2.0 shock body has increased oil capacity to help dissipate heat during off-road use.

The shaft is 14mm chrome-hardened, the shock has a silver powder coat finish, and a redesigned wiper seal is used. A polyurethane shock boot is included.

The PRO-M is a rear shock for the Ram models listed above, and each shock is sold individually. Pro Comp says PRO-M shocks are built for having fun off-road and delivering a smooth ride on the road. The 2.0 shock body gives more oil capacity, and that extra oil helps the shock shed heat during long off-road use.

Cavitation is the loss of damping that happens when oil foams under heavy use. The floating piston limits it by keeping the nitrogen charge apart from the oil, and the wiper seal is redesigned to keep oil in the shock.

Key features

  • Monotube design with an internal floating piston
  • Nitrogen gas charge
  • Multi-stage valving
  • 2.0 shock body with increased oil capacity
  • 14mm chrome-hardened shaft
  • Polyurethane shock boot included

Off-road use and heat

Heat is the main enemy of a shock that works hard off-road. Each compression turns motion into heat, and a shock that cannot shed it quickly loses damping. A larger oil reservoir gives the oil more room to move and cool, which is why oil capacity matters on long descents and sandy washes.

Maintenance is mostly about keeping dirt out. The boot protects the shaft from grit, and the wiper seal keeps oil in the body. After trail use, wipe the shaft clean, check for seepage and inspect the mounts. A shock that leaks or makes unusual noise should be replaced rather than repaired.

  • Clean the shaft after mud or sand runs
  • Check the boot for cuts after rock crawling
  • Look for oil leaks around the shaft seal
  • Inspect mounts and bushings during oil changes

Specifications

Brand Pro Comp Suspension
Part number EXPPR2113
Shock series PRO-M
Position Rear
Shock type Monotube, gas charged (nitrogen)
Extended length 24.4 inches
Compressed length 16.1 inches
Upper mount Stem
Shaft 14mm chrome-hardened
Finish Silver powder coat
Boot Polyurethane, included

Vehicle fitment

It fits the 2014–2021 Ram 2500 and the 2014 Ram 3500.

The list does not include other Ram model years or the 3500 for other years. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Check the 24.4-inch extended and 16.1-inch compressed lengths against your suspension’s travel before installing, and account for any lift when choosing this length.

What’s included

One PRO-M rear shock with a polyurethane shock boot, sold individually.

Fitment

VehicleYearsTrims
Ram 25002014–2021Big Horn, Laramie, Laramie Limited, Laramie Longhorn, Limited, Limited Longhorn, Lone Star, Outdoorsman, Power Wagon, SLT, Tradesman
Ram 35002014Big Horn, Laramie, Laramie Limited, Laramie Longhorn, Lone Star, SLT, Tradesman

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

What are the extended and compressed lengths of the PR2113?

The extended length is 24.4 inches and the compressed length is 16.1 inches. Together these set the travel range the shock can use.

Does the PRO-M shock include a boot?

Yes. A polyurethane shock boot is included with the shock to help keep dirt and debris off the 14mm chrome-hardened shaft.

Is the PRO-M gas charged?

Yes. It is nitrogen gas charged with a monotube design and an internal floating piston that separates the oil from the gas charge to avoid cavitation.

How should a PRO-M shock be cared for?

Keep the boot in place and clean dirt from the shaft after trail use. Inspect the wiper seal for oil seepage, and check mounts and bushings during regular service. A shock that leaks oil or makes noise should be replaced rather than repaired.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon