Overview
The Pro Comp Suspension 52230BX-2 is a 2.5-inch rear monotube shock with eyelet mounts at both ends. It fits the 2019 to 2023 Ford Ranger in XL, XLT and Lariat trims and belongs to the PRO-VST line, which is built for rough off-road use and tuned for each vehicle.
The body is hard-anodized with thick walls and an impact forged design, which adds damping capacity. The 17-4 PH stainless steel shaft is precipitation hardened and chrome plated.
Key features
- Monotube rear shock with eyelet top and bottom mounts
- Hard-anodized thick wall impact forged body
- 17-4 PH stainless steel shaft, chrome plated
- Vehicle specific tuning
- Gas charged
Rear shock wear signs
Rear shocks wear out gradually, so the change often shows up as bouncing after bumps, a rear end that feels loose or a hard ride on rough roads. Check the eyelet bushings at both ends for cracks or looseness. A stroke that feels rough or uneven when the shock is compressed by hand usually means internal wear.
Eyelet mounts rely on bushings and bolts that can loosen with heavy use, so check torque after the first drive and periodically afterward. If the Ranger carries a bed load or tows, the rear shocks work harder, and replacing them in pairs keeps both sides matched. Inspect the frame and spare tire mount for rubbing, since a shifted body can cause contact.
- Test rear shock stroke by hand
- Check eyelet bushings for cracks
- Retighten mount bolts after the first drive
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 52230BX-2 |
| Shock series | PRO-VST |
| Position | Rear |
| Shock type | Monotube |
| Body diameter | 2.5 in |
| Top mount | Eyelet |
| Bottom mount | Eyelet |
| Charge | Gas charged |
Vehicle fitment
It fits the 2019 to 2023 Ford Ranger in XL, XLT and Lariat models.
Match the rear position and the model year to your truck before ordering, since earlier Ranger generations and other Ford trucks need separate confirmation.
Installation notes
Eyelet mounts at both ends are common on rear shocks. Check the bolt sizes and bushing fit against the Ranger’s existing mounts before installing. Once installed, check the shock for travel clearance at full compression.
Once the truck is at ride height, check for a smooth stroke. Confirm the eyelet bushings sit square and that the body does not rub on the frame or the spare tire mount.
What’s included
One rear monotube shock under part number 52230BX-2.
















