Overview
The Pro Comp 919500B is a PRO-X twin tube shock absorber with a 19.8-inch extended length, a 12.3-inch collapsed length and 7.60 inches of travel. It fits a wide range of trucks and SUVs, led by the 1987–1991 Chevrolet and GMC V-series pickups and Suburbans, and including the Blazer, the Isuzu Trooper, several Jeep models and the Toyota Tacoma.
The PRO-X is a general-purpose twin tube design for vehicles used mostly on pavement with occasional off-road trips. It has 10-stage velocity sensitive valving, a 1-3/8-inch nylon banded piston and a 5/8-inch chrome hardened shaft, with loop eyes at both ends.
Because one part covers several different vehicle families, the mounting check matters more here than on a single-application shock. The body is black powder coated and nitrogen stabilized, and the optional boot is not included.
Key features
- Twin tube design for general-purpose use
- 10-stage velocity sensitive valving
- 1-3/8-inch nylon banded piston
- 5/8-inch chrome hardened shaft
- Loop eyes at both ends
- Black powder-coated finish
Multi-vehicle fit checks
A shock used across several vehicle families has to match a wide range of mounting points and body heights. Compact SUVs such as Wranglers and Cherokees sit at a different ride height than full-size Suburbans, so the same shock can feel very different from one vehicle to the next. Measure the existing shock first and compare the loop eyes and length before buying.
Multi-application shocks are often chosen for trail use, where clearance at full droop matters. Check that the shock does not contact the tire, the frame or the axle housing at full extension and full compression. Replacing worn bump stops and checking the springs at the same time keeps the setup balanced.
- Compare loop eye diameter with the old shock
- Check clearance at full droop
- Keep shocks matched in pairs
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 919500B |
| Shock series | PRO-X |
| Shock type | Twin tube, gas charged (nitrogen stabilized) |
| Location | Universal |
| Extended length | 19.8 in |
| Collapsed length | 12.3 in |
| Travel length | 7.60 in |
| Body diameter | 2.0 in |
| Piston | 1-3/8 in nylon banded |
| Shaft | 5/8 in chrome hardened |
| Upper mount | Loop |
| Lower mount | Loop |
| Finish | Black powder coat |
| Boot | Optional, not included |
Vehicle fitment
It fits the 1987–1991 Chevrolet Blazer, the 1987 Chevrolet V10 and V20, the 1987–1988 V10 and V20 Suburbans, the 1989–1991 Chevrolet V2500 Suburban, and the 1987–1991 GMC V2500 Suburban. It also fits the 1992–2002 Isuzu Trooper, the 1992–2000 Jeep Cherokee XJ, the 1993 Jeep Grand Wagoneer SJ, the 1992–1995 Jeep Wrangler YJ, the 1997–2000 Jeep Wrangler TJ, and the 1995–2000 Toyota Tacoma.
Wrangler years outside 1992–1995 and 1997–2000 are not on this list, and the 2001 and later Cherokee and Tacoma are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
This shock covers vehicles with different mounting points, so compare the loop eyes and the 19.8-inch extended length with the existing shock before ordering. Check clearance at full droop, since the listed vehicles range from full-size trucks to compact SUVs.
What’s included
One twin tube shock with loop eyes at both ends. The optional boot is not included.
Not included: the optional boot and any extra brackets.









