Overview
The Pro Comp PR2091 is a gas charged monotube rear shock absorber for the 1984–2001 Jeep Cherokee XJ, made for vehicles with a 3.5 to 4 inch lift. The PRO-M is built to deliver stronger off-road control while keeping the ride comfortable on the road home.
The shock uses an internal floating piston that keeps the oil and the nitrogen charge apart, which helps prevent cavitation during hard use. Multi-stage valving is tuned for each application, and the 2.0 shock body holds more oil to help it shed heat during off-road driving.
Key features
- Monotube design with an internal floating piston
- Nitrogen gas charge, which Pro Comp links to consistent ride quality
- Multi-stage disc pack with vehicle specific valving
- 2.0 shock body with increased oil capacity for heat dissipation
- Wiper seal design that Pro Comp says keeps the shock from leaking
- 14mm chrome hardened shaft
- Silver powder coat finish
Before you buy
A rear shock on a Cherokee XJ does more than smooth bumps. It helps keep the tires in contact with the ground over washboard roads and controls body motion when the vehicle leans through turns. Because the lift height changes shock travel, measure the current unit before choosing a replacement, and think about how the truck is used most of the time.
Upgrading one part can expose wear elsewhere. Worn bushings, tired springs and loose mounting hardware all change how a new shock behaves, so inspect them while the rear end is apart. When both sides are replaced, keep them as a matched set so the truck tracks straight and sits level. Keep records of the replacement date for future reference.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | PR2091 |
| Location | Rear |
| Shock type | Monotube |
| Gas charge | Nitrogen gas charged |
| Extended length | 23.8 inches |
| Collapsed length | 15.3 inches |
| Shaft | 14mm chrome hardened |
| Boot | Polyurethane shock boot included |
| Sold as | Individually |
Vehicle fitment
It is made for vehicles with a 3.5 to 4 inch lift, and the 1984–2001 Jeep Cherokee XJ is the application it fits. Confirm fit for your vehicle’s year, model and trim before ordering.
The list covers the Cherokee XJ only. It does not include the Wrangler YJ or TJ, the Grand Cherokee ZJ or WJ, or the 2002–2007 Liberty. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Compare the 15.3 inch collapsed and 23.8 inch extended lengths with your current rear shock at both ends of its travel. Those two numbers, along with the lift itself, decide whether the shock suits your truck.
The shock is sold individually, so a pair needs two units. When both rear shocks are replaced, match their lengths so the vehicle keeps even damping and ride height from side to side.
What’s included
One rear shock absorber with its polyurethane shock boot.
Not included: the second rear shock, because this shock is sold individually.









