Overview
The Pro Comp 924515B is a PRO-X twin tube shock absorber with a 24.7-inch extended length and a 14.5-inch collapsed length. It fits the 1984–2001 Jeep Cherokee XJ in several trims, the 1993–1998 Grand Cherokee ZJ, the 1999–2001 Grand Cherokee WJ, the 1997–2001 Wrangler TJ, and the 1987–1995 Wrangler YJ.
The PRO-X is a general-purpose twin tube design for vehicles that see mostly pavement with some off-road use. Its 10-stage velocity sensitive valving handles a range of road conditions, and the 1-3/8-inch nylon banded piston and 5/8-inch chrome hardened shaft carry the load. The shock is listed with a travel length of 10.19 inches.
The shock has a stem upper mount and a loop lower mount, a 2.0-inch body and a black powder-coated finish. It is nitrogen stabilized, and the optional shock boot is not included.
Key features
- Twin tube design for general-purpose use
- 10-stage velocity sensitive valving
- 1-3/8-inch nylon banded piston
- 5/8-inch chrome hardened shaft
- Stem upper mount
- Black powder-coated finish
Stem and loop combinations
Stem-over-loop mounting is a common layout on Jeep SUVs of this generation, and it needs the stem end to seat in the upper bracket while the loop end pivots on the lower axle bracket. A mismatched end can force the bushing or cause binding at full extension. Before ordering, check the upper bracket style on the existing shock and whether the lower loop fits the axle pin.
Cherokee and Wrangler owners often replace the shock when the suspension is raised, since the stroke is then used differently. Look for cracked rubber in the stem bushing, a clunk on rebound, and oil streaks on the body. Replacing the upper and lower bushings at the same time keeps the shock aligned and quiet over rough trails.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 924515B |
| Shock series | PRO-X |
| Shock type | Twin tube, gas charged (nitrogen stabilized) |
| Location | Universal |
| Extended length | 24.7 in |
| Collapsed length | 14.5 in |
| Travel length | 10.19 in |
| Body diameter | 2.0 in |
| Piston | 1-3/8 in nylon banded |
| Shaft | 5/8 in chrome hardened |
| Upper mount | Stem |
| Lower mount | Loop |
| Finish | Black powder coat |
| Boot | Optional, not included |
Vehicle fitment
It fits the 1984–2001 Jeep Cherokee XJ in the Base, Classic, Laredo, Limited and Sport trims, the 1993–1998 Grand Cherokee ZJ, the 1999–2001 Grand Cherokee WJ in the Laredo and Limited trims, the 1997–2001 Wrangler TJ in the SE, Sahara and Sport trims, and the 1987–1995 Wrangler YJ in several trims.
Wrangler JK and later models, and Grand Cherokee models from 2002 onward, are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check the stem upper mount and loop lower mount against the existing bracket, and confirm the 24.7-inch extended length fits your installed suspension height before driving. Measure the existing shock before ordering to confirm the mounts.
What’s included
The upper end is a stem and the lower end is a loop on this twin tube shock. The boot is an optional part.
Not included: the optional boot.









