Overview
The Pro Comp 934008B is a PRO-X twin tube shock absorber for the 1999–2016 Ford F-250 and F-350 Super Duty, with a 34-inch extended length for lifted trucks.
The PRO-X is a general-purpose twin tube design for mostly paved roads with occasional off-road use. It is nitrogen stabilized and gas charged, with 10-stage velocity sensitive valving and a Teflon rebound stop.
The 5/8-inch chrome hardened piston rod and the Teflon rebound stop are described by Pro Comp as giving a comfortable highway ride and the ability to handle demanding driving conditions. Each unit is one shock, and the shock boot is optional.
Key features
- 10-stage velocity sensitive valving
- 5/8-inch chrome hardened shaft
- 1-3/8-inch nylon banded piston
- Nitrogen stabilized, gas charged twin tube design
- Teflon rebound stop
- Eyelet mounts at the top and bottom, black powder coat finish
Paved roads and occasional trail use
A general-purpose twin tube shock balances comfort on pavement with control on loose surfaces. On a truck that sees mostly highway miles, the valving determines how firmly the body rebounds after a joint or a pothole. Velocity sensitive valving changes resistance with shock speed, so small bumps feel softer while large hits stay controlled.
Eyelet mounts at both ends are common on Super Duty trucks, and they rely on bushings that can wear over time. Inspect the eyelet bushings for splitting or play, and check the hardware torque after the first few drives on a new unit. Keep the rod clean, since dirt on the chrome shaft can cut the seal.
- Check eyelet bushings for play
- Recheck hardware after first drives
- Keep the rod clean
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 934008B |
| Shock series | PRO-X |
| Shock type | Twin tube, gas charged |
| Extended length | 34 inches |
| Compressed length | 19.4 inches |
| Travel length | 14.05 inches |
| Body diameter | 2.0 inches |
| Piston | 1-3/8-inch nylon banded |
| Shaft | 5/8-inch chrome hardened |
| Valving | 10-stage velocity sensitive |
| Top and bottom mounts | Eyelet |
| Finish | Black powder coat |
| Quantity | One shock per unit |
Vehicle fitment
It fits the 1999–2016 Ford F-250 Super Duty and the 1999–2016 Ford F-350 Super Duty.
It does not fit other Ford trucks or Super Duty models outside those years. Verify the year, model and trim against your truck before buying.
Installation notes
Compare the 34-inch extended and 19.4-inch compressed lengths with the mounting points on your truck before installing, since the shock’s travel depends on where it mounts. Both ends use eyelets, so the hardware at each mounting point needs to fit an eyelet. Measure your truck’s mount points before ordering, since the shock is listed at a 2.0-inch body diameter.
What’s included
One twin tube shock per unit.
Not included: The optional shock boot, which is available separately.









