Overview
The Pro Comp PRO-X 918509B is a twin tube, gas charged shock absorber with an extended length of 18.74 inches and a collapsed length of 11.82 inches. It fits 1968 to 1971 vehicles, including the Jeep CJ5 and CJ6.
The PRO-X uses 10-stage velocity sensitive valving, a 5/8 inch chrome hardened shaft and a 1-3/8 inch nylon banded piston. It is intended for paved roads with occasional off-road use.
Gas charged means the body holds a nitrogen charge above the oil, which helps keep the oil from foaming under hard use. This shock is nitrogen stabilized for that reason.
Key features
- Gas charged, nitrogen stabilized body
- 10-stage velocity sensitive valving
- 1-3/8 inch nylon banded piston
- 5/8 inch chrome hardened shaft
- Black powder coat finish
Measuring before you buy
Older Jeep suspensions often have worn bushings and tired shocks, so a replacement is worth paying attention to beyond the shock itself. Measure from eye to eye on the old unit, both collapsed and extended, and compare those figures with the new shock. The difference is the travel the shock works through, and a shock with the wrong travel can bind or run out of stroke.
Mount style matters on these trucks because eyelet and loop ends both appear across the range. Check the bushings and bolts at each end, and replace any that are cracked or worn. Old gas charged shocks can also lose their charge over time, which makes them feel soft under braking.
- Measure eye to eye, collapsed and extended
- Check the mount style at both ends
- Inspect bushings for cracking
- Replace worn hardware along with the shock
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 918509B |
| Shock series | PRO-X |
| Shock type | Twin tube, gas charged, nitrogen stabilized |
| Extended length | 18.74 inches |
| Collapsed length | 11.82 inches |
| Travel length | 7.06 inches |
| Body diameter | 2.0 inches |
| Piston | 1-3/8 inch nylon banded |
| Shaft | 5/8 inch chrome hardened |
| Damping | 10-stage velocity sensitive valving |
| Upper and lower mounts | Eyelet or loop |
| Finish | Black powder coat |
| Location | Universal application |
Vehicle fitment
Fits 1968–1971 Jeep CJ5, CJ6, Commando, Jeepster and Wagoneer (SJ) models, the 1968 CJ5A, CJ6A and DJ6, International Scout and Scout II, Dodge W300 pickups, and 1968–1971 Land Rover models.
Jeep CJ7 and Wrangler models are not on the list, and neither are model years after 1971. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Both eyelet and loop mounts apply, so confirm which style your vehicle uses before ordering.
What’s included
One shock absorber, sold individually. The shock boot is optional and not included.
Before ordering, measure your current shock’s extended and collapsed lengths from eye to eye. Compare those figures with the 18.74 inch extended and 11.82 inch collapsed lengths here, because the travel is the difference between them.









