Overview
The Pro Comp Suspension 51038BX-2 is a 2.5-inch rear monotube shock for the 2007 to 2021 Chevrolet Silverado 1500. It also fits the 2007 Silverado 1500 Classic and HD Classic and the 2019 Silverado 1500 LD.
The body is thick walled, hard-anodized and impact forged, which reduces friction and bore wear inside the body. The shaft is 17-4 PH stainless steel with chrome plating.
Key features
- Rear monotube design
- Hard-anodized, impact forged body
- 17-4 PH stainless steel shaft, chrome plated
- Vehicle specific tuning for on-road ride quality
- Gas charged
Rear mounts and clearance
Rear mounts are the first thing to compare on a Silverado rear shock, since eyelet and stud styles do not interchange. Confirm the upper and lower mounts against your truck before the old shock comes off, and keep the old unit as a reference for length. Matching the mount style prevents rushed fixes later.
A thick walled monotube body adds damping capacity, but the body still needs room to travel through full compression. Check that the shock does not contact the frame, axle or bump stop at either extreme. On a truck used for towing or heavy loads, rear shocks are often replaced alongside leaf springs or bushings to keep the ride balanced.
- Compare eyelet or stud style
- Measure installed length before removal
- Check bump stop clearance
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 51038BX-2 |
| Shock series | PRO-VST |
| Position | Rear |
| Shock type | Monotube |
| Body diameter | 2.5 in |
| Shaft | 17-4 PH stainless steel, chrome plated |
| Charge | Gas charged |
Vehicle fitment
It fits the 2007 to 2021 Chevrolet Silverado 1500, along with the 2007 Silverado 1500 Classic, the 2007 Silverado 1500 HD Classic and the 2019 Silverado 1500 LD.
Check fit against the Silverado 2500 HD and GMC Sierra before ordering, since this shock is sized for the 1500 range.
Installation notes
Check the rear mounts on the Silverado before ordering, since eyelet or stud styles must match your truck. Measure the shock you are replacing and compare it with the new unit. The PRO-VST design uses a thick walled body, so there is more damping capacity, but the rear travel still needs clearance at full compression.
Check that the rear shock is seated and the mounts are tight before highway driving. Confirm the shock clears bumps and has travel room through the full range of the rear axle.
What’s included
One rear monotube shock under part number 51038BX-2.


















