Overview
The Pro Comp PRO-X Twin Tube Shock Absorber, part number EXP927553B, is a twin tube shock with a 27.8 inch extended length, a stem upper mount and a black powder coat finish.
The PRO-X is designed for vehicles that see a lot of paved roads with the occasional off-road trip, and it comes in extended lengths for lifted trucks. Its 10-stage velocity-sensitive valving handles a range of road conditions and helps the truck feel steady as conditions change.
The shock uses a 1-3/8 inch nylon-banded piston and a 5/8 inch chrome hardened piston rod with a Teflon rebound stop. The rod and rebound stop support a comfortable highway ride and handle demanding driving.
The body diameter is 2.0 inches, the travel is 11.45 inches and the compressed length is 16.3 inches. The shock is gas charged and nitrogen stabilized. Its location is universal, and the shock boot is a separate part.
Compatible models span Ford Super Duty and Ram trucks from 2005 to 2021, so confirm your model and year before ordering.
Key features
- Twin tube design for general-purpose road and trail use
- 10-stage velocity-sensitive valving
- Teflon rebound stop
- 5/8 inch chrome hardened piston rod
- 1-3/8 inch nylon-banded piston
- Gas charged and nitrogen stabilized
- Extended lengths for lifted trucks
- Stem upper mount and black powder coat finish
Choosing a shock for a lift
A lifted truck changes the geometry of the suspension, so the shock must reach farther to control the axle. Extended-length shocks are made for this, but the right length depends on the truck’s ride height, the lift size and how far the axle droops. A shock that is too short can run out of travel and bottom out, while one that is too long can bind at full droop.
Valving also matters for mixed road and trail use. A firmer setup can help the truck feel steady at speed, while a softer valve can soak up small trail bumps. Stem and loop mounts behave differently under load, so check the upper mount before installing. Replace shocks in pairs on the same axle and recheck the fasteners after the first few trail runs.
- Measure ride height before choosing length
- Confirm upper mount type
- Replace shocks in pairs on the same axle
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | EXP927553B |
| Shock series | PRO-X |
| Shock type | Twin tube, gas charged, nitrogen stabilized |
| Position | Universal |
| Extended length | 27.8 inches |
| Compressed length | 16.3 inches |
| Travel length | 11.45 inches |
| Body diameter | 2.0 inches |
| Upper mount | Stem top |
| Lower mount | Loop (the detailed specifications list an eyelet; confirm before ordering) |
| Piston | 1-3/8 inch nylon-banded |
| Piston rod | 5/8 inch chrome hardened |
| Valving | 10-stage velocity sensitive |
| Rebound stop | Teflon |
| Finish | Black powder coat |
| Shock boot | Separate part, not included |
| Quantity | 1 (each) |
Vehicle fitment
It fits the 2005 through 2016 Ford F-250 and F-350 Super Duty and the 2014 through 2021 Ram 2500.
The list does not include Super Duty trucks from 2017 and later, or F-250 and F-350 models before 2005.
Ram 2500 models before 2014 and after 2021 are not on the list either. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Confirm whether the lower mount is a loop or an eyelet against your truck’s existing hardware before ordering.
Measure the installed length of the shock you are replacing and compare it with the 27.8 inch extended and 16.3 inch compressed lengths.
What’s included
One PRO-X twin tube shock absorber, part EXP927553B, with black powder coat finish.
Not included: the shock boot, which is a separate part.









