Overview
The Pro Comp 925509B is a PRO-X twin tube shock absorber in an extended length for lifted trucks, sold individually. It is designed for vehicles that see a lot of paved road with the occasional off-road trip.
The shock has a general-purpose twin tube design that Pro Comp says gives a comfortable highway ride and the ability to handle demanding driving. It uses 10-stage velocity sensitive valving, which Pro Comp says accommodates a range of road conditions and improves handling.
The large 5/8 inch chrome hardened piston rod and a Teflon rebound stop are part of the design. The shock has a 1-3/8 inch nylon banded piston and a 2.0 body, with 10.19 inches of travel between its compressed and extended lengths.
Key features
- Twin tube design with nitrogen stabilization
- 10-stage velocity sensitive valving
- 1-3/8 inch nylon banded piston
- 5/8 inch chrome hardened piston rod
- Teflon rebound stop
- Black powder coat finish
- Sold individually, with shock boots sold separately
Ride height and shock length
Shock length is tied to ride height. A longer extended length suits a truck that has been lifted or fitted with taller suspension, while stock height trucks may bind or overextend with a shock that is too long. Before buying, measure the current shock at full extension and full compression, then compare those figures with the lengths shown above.
Twin tube designs use a pressure tube inside a reserve tube, which suits daily driving on pavement with trail use on weekends. Older trucks often have worn bushings, bent brackets and tired springs, so check those parts before replacing shocks. Older frames can also have worn mount points that need attention. A new shock on worn hardware will not give the control it was designed for.
- Measure the old shock at both extremes
- Inspect eyelets and mounts for rust
- Replace shocks in pairs for even damping
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 925509B |
| Shock series | PRO-X |
| Shock type | Twin tube |
| Gas charge | Nitrogen stabilized, gas charged |
| Extended length | 25.65 inches |
| Compressed length | 15.5 inches |
| Travel | 10.19 inches |
| Body diameter | 2.0 |
| Piston | 1-3/8 inch nylon banded |
| Piston rod | 5/8 inch chrome hardened |
| Finish | Black powder coat |
| Location | Universal |
| Shock boot | Optional, sold separately |
Vehicle fitment
It fits Chevrolet and GMC K and V series trucks and Suburbans from 1973 to 1991, the Chevrolet and GMC Blazer and Jimmy, and the 1983–1991 Ford Ranger.
The list ends in 1991, so Silverado and Sierra trucks from later generations are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Each shock is sold individually, so order one for each position you are replacing. Compare the 25.65 inch extended and 15.5 inch compressed lengths with your current shock at both full extension and full compression.
What’s included
One PRO-X twin tube shock absorber.
Not included: shock boots, which are sold separately.









