Select your vehicle
-13%

Pro Comp PRO-X Twin Tube Shock Absorber – 921010B

Pro Comp Suspension

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Pro Comp PRO-X twin tube shock for the 2002-2008 Dodge Ram 1500
  • Extended length 21.1 inches, collapsed 12.7 inches, 8.4-inch travel
  • Nitrogen stabilized with 10-stage velocity sensitive valving
  • Optional shock boot sold separately; sold individually

Description

Overview

The Pro Comp PRO-X Twin Tube Shock, part number 921010B, is a nitrogen stabilized twin tube shock for the 2002–2008 Dodge Ram 1500. Pro Comp designed it for vehicles that see mostly paved roads with the occasional off-road trip.

The shock has 10-stage velocity sensitive valving, a 2.0-inch body, a 1-3/8 inch nylon banded piston and a 5/8-inch chrome hardened shaft. The unique Teflon rebound stop is part of the design. The extended length is 21.1 inches, the collapsed length is 12.7 inches and the travel length is 8.4 inches.

Key features

  • Twin tube design with a Teflon rebound stop
  • 10-stage velocity sensitive valving
  • 5/8-inch chrome hardened shaft
  • 1-3/8 inch nylon banded piston
  • 2.0-inch body diameter
  • Stem top mount with loop bottom mount
  • Black powder coat finish
  • Shock boot sold separately

Ride height and travel

The travel a shock uses depends on how the truck sits. Ride height, load and tire size all change how much of the stroke gets used, so a shock that looks right on paper can feel stiff or run short on a particular truck. Measuring the installed length on the vehicle gives a better picture than any figure taken off the bench.

Worn boots and bushings are common on trucks of this age. Look for splits in the boot, play at the mounts and fluid on the shock body. If the old shocks show any of these signs, replacing them is a reasonable step, and a pair keeps the ride even from side to side.

  • Check boots for splits
  • Feel for play at the mounts
  • Measure installed length on the truck
  • Replace shocks in pairs for an even ride

Specifications

Brand Pro Comp Suspension
Part number 921010B
Series PRO-X
Shock type Twin tube
Extended length 21.1 inches
Collapsed length 12.7 inches
Travel length 8.4 inches
Body diameter 2.0 inches
Upper mount Stem
Lower mount Loop
Piston 1-3/8 inch nylon banded
Shaft 5/8-inch chrome hardened
Gas charge Nitrogen stabilized
Finish Black powder coat
Shock boot Optional, sold separately

Vehicle fitment

It fits the 2002–2008 Dodge Ram 1500 across its trims.

The fitment data does not include other Ram models or the 2009 and later Ram 1500. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Measure the current shock’s collapsed and extended lengths before installing. The 12.7-inch collapsed length and 21.1-inch extended length are the figures to compare, along with the 8.4-inch travel length, since the truck’s ride height decides how much of that travel is used.

The shock is sold individually. The optional shock boot is a separate part, so plan on it if the old boots are worn. Pro Comp designed the valving for vehicles that see mostly paved roads with the occasional off-road trip.

What’s included

One shock absorber. Shock boots are sold separately.

Fitment

VehicleYearsTrims
Dodge Ram 15002002–2008Laramie, SLT, SRT-10, ST, SXT, Sport, TRX4

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Does this PRO-X shock fit a 2008 Dodge Ram 1500?

Yes. The fitment data includes the 2002–2008 Dodge Ram 1500, which covers 2008. The fitment data does not include other Ram models or the 2009 and later Ram 1500.

What is the travel length of the 921010B?

The travel length is 8.4 inches, going from a 12.7-inch collapsed length to a 21.1-inch extended length. The body diameter is 2.0 inches and the top mount is a stem.

Is a shock boot included?

No. The optional shock boot is sold separately, so a boot is an extra part to choose. The shock is nitrogen stabilized with a black powder coat finish.

How do I know whether the Ram's shocks need replacing?

Watch for fluid on the shock body, a floating or bouncy ride, and cupped tire wear. Bounce each corner and see whether the truck settles after one or two cycles. Worn boots or bushings also make a shock feel loose, so inspect them while the wheels are off.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon