Overview
The Pro Comp 927500B is a PRO-X twin tube shock absorber with a 27.8-inch extended length and a 16.3-inch collapsed length. It fits a large group of 1992–1994 Chevrolet and GMC trucks, from the C1500 and K1500 up to the K2500 and K3500, including their Suburban versions. It also fits the Chevrolet Blazer, the GMC Jimmy and Yukon, and the Ford F-150 and F-150 Lightning for the same years.
The PRO-X is a general-purpose twin tube design for trucks used mostly on pavement with some off-road driving. Its 10-stage velocity sensitive valving is designed to handle a range of road conditions, and the 1-3/8-inch nylon banded piston and 5/8-inch chrome hardened shaft carry the working loads.
Both mounts are loop eyes, and the shock has a travel length of 11.45 inches. The 2.0-inch body is black powder coated, and the gas charge is nitrogen stabilized. The optional boot is not included.
Key features
- Twin tube design for general-purpose use
- 10-stage velocity sensitive valving
- 1-3/8-inch nylon banded piston
- 5/8-inch chrome hardened shaft
- Loop eyes at both ends
- Black powder-coated finish
Long-stroke shocks for big trucks
A long-stroke shock gives a full-size pickup room to articulate over ruts and rock, but it also adds mass that the mounts must carry at speed. The travel range should be matched to the lift and tire size, since a shock that runs out of stroke can bottom out and send harsh impacts into the frame. Pickups that tow or carry heavy payloads place extra demand on the damping, so the shock should suit the load.
Full-size trucks of this period often show worn bushings, cracked loop eyes, and rust at the lower axle brackets, and each one affects how the new shock behaves. When a shock is replaced, check the other shocks on the same axle and the bump stops at the frame. Tire balance and wheel alignment are worth checking after installation to keep wear even.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 927500B |
| Shock series | PRO-X |
| Shock type | Twin tube, gas charged (nitrogen stabilized) |
| Location | Universal |
| Extended length | 27.8 in |
| Collapsed length | 16.3 in |
| Travel length | 11.45 in |
| Body diameter | 2.0 in |
| Piston | 1-3/8 in nylon banded |
| Shaft | 5/8 in chrome hardened |
| Upper mount | Loop |
| Lower mount | Loop |
| Finish | Black powder coat |
| Boot | Optional, not included |
Vehicle fitment
It fits the 1992–1994 Chevrolet Blazer, C1500, K1500, K2500 and K3500 pickups and their Suburban versions, the GMC C1500, K1500, K2500 and K3500 trucks and Suburbans, the GMC Jimmy and Yukon, and the Ford F-150 and F-150 Lightning for 1993 and 1994.
Trucks and SUVs from 1995 onward are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
This is a long-stroke shock for full-size trucks, and its 27.8-inch extended length should be compared with the installed suspension height before driving. Check the loop eyes against the existing bracket and confirm clearance at full compression.
What’s included
Loop eyes at each end mark this twin tube shock. The boot is an optional part and is not included.
Not included: the optional boot.









