Overview
The Pro Comp PRO-M monotube front shock absorber, part number PR2110, is a nitrogen gas charged shock for 4WD Nissan Titan models with 0 to 2 inches of lift. It fits the 2004-2015 and 2017-2024 Titan.
The shock has an internal floating piston that keeps oil and nitrogen separate, which helps prevent the cavitation that robs performance. It uses a 2.0 inch shock body for more oil capacity and heat dissipation during off-road use, multi-stage disc valving and a 14 mm chrome hardened shaft. The wiper seal design is meant to prevent leaks.
The PRO-M is built as a step up in off-road performance, with fast reaction and consistent ride quality on tough terrain and on the drive back to town. The valving is vehicle specific, so each part number is tuned for the application it is sold for.
Key features
- Internal floating piston separates oil and nitrogen
- Multi-stage disc pack valving
- 2.0 inch shock body for more oil capacity
- 14 mm chrome hardened shaft
- Polyurethane shock boot included
Front suspension on a Titan
The front shocks on a 4WD Titan manage body motion over ruts, washboard and braking loads. Because the front end carries the engine weight, the shock and its mounts see steady stress, so a shock with a consistent valve response helps keep steering predictable on long drives.
Installation is easier when the new shock is compared with the old one for length and mount type before the old unit comes off. Tighten the mounts to the vehicle’s specified torque and recheck them after the first few drives. Alignment checks are a good idea after front suspension work.
Front-end wear usually shows up as clunks, uneven tire wear or a vague feel at highway speed. Ball joints, control arm bushings and tie rod ends should be checked alongside the shock.
- Compare old and new shock lengths before removal
- Recheck mounting torque after the first drives
- Inspect control arm bushings during service
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | PR2110 |
| Series | PRO-M |
| Type | Monotube, nitrogen gas charged |
| Position | Front |
| Extended length | 15.3 in |
| Collapsed length | 11 in |
| Upper mount | Stem |
| Lower mount | Loop (eyelet) |
| Body diameter | 2.0 in |
| Shaft | 14 mm chrome hardened |
| Valving | Vehicle specific, multi-stage disc pack |
| Boot | Polyurethane, included |
| Finish | Silver powder coat |
| Lift range | 0 to 2 in |
| Drive | 4WD models |
| Quantity | Sold individually |
Vehicle fitment
It fits 4WD Nissan Titan models from 2004-2015 and 2017-2024.
The list has no 2016 model year, so a 2016 Titan is not included. Models with more than 2 inches of lift are outside the stated range. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The shock comes with its polyurethane boot already fitted, so no separate boot is needed. Because the shock is sold individually and is for front positions only, plan one unit for each front position on a 4WD truck with 0 to 2 inches of lift.
What’s included
One front shock with a polyurethane boot, sold individually.









