Overview
The Pro Comp Suspension PR2048 is a PRO-M rear monotube shock for the 2004 to 2015 Nissan Titan. It has an extended length of 27.4 inches and a collapsed length of 17.5 inches, and it is sold individually.
The shock is nitrogen gas charged and uses a floating piston to keep oil and gas separate. Its multi-stage valving is vehicle specific, and the larger body holds more oil.
Key features
- Rear monotube design
- Extended length 27.4 inches, collapsed length 17.5 inches
- Nitrogen gas charged with floating piston
- Multi-stage disc pack valving
- 14 mm chrome hardened shaft
- Polyurethane shock boot included
Before you buy
A rear monotube shock controls how the axle moves over bumps and during braking. On a Titan, the rear shocks work with the leaf springs to set ride comfort and body control, so a replacement should match the height of the rest of the suspension. Pairing a new shock with worn bushings or a tired spring can leave the rear feeling loose even when the damping is fresh.
Look at the old shock before ordering. Oil seepage on the body, a dented shaft, or a boot that has split are signs it has lost its damping. Measure the extended and collapsed lengths of the old unit at the same mounting points, so the replacement sits in the same range. Write those measurements down before ordering.
- Check mount hardware for wear before installing
- Replace shocks in pairs for even handling
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | EXPPR2048 |
| Shock series | PRO-M |
| Position | Rear |
| Extended length | 27.4 in |
| Collapsed length | 17.5 in |
| Lift | 3 in or 6 in. Confirm the lift height on your truck before ordering. |
| Finish | Silver powder coat |
Vehicle fitment
It fits the 2004 to 2015 Nissan Titan in trims including LE, PRO-4X, S, SE, SL, SV and XE.
Fit is for Titan models only. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Compare the 27.4 inch extended and 17.5 inch collapsed lengths with the rear shock being removed. Measure your Titan’s lift and confirm the shock matches it before ordering. Check the mount style against the factory brackets before installing.
Measure the rear of your Titan before ordering. Confirm the mounts seat without binding and the body clears the frame and the rear spring through full travel.
Check the rear shock clears the frame, the spring perch and any rear bumper on the Titan through full compression and full droop.
The finish is silver powder coat, and each order covers one shock.
What’s included
One PRO-M rear monotube shock with polyurethane boot under part number EXPPR2048.









