Overview
The Pro Comp Suspension ZX2122 is a rear Pro Runner monotube shock for a Ford F-150 with a 6 inch lift. It fits the 2015 to 2017 F-150 in several trims, including XL, XLT, Lariat, King Ranch and Platinum.
The shock is nitrogen gas charged to limit cavitation. The monotube design is meant to dissipate heat better than traditional twin tube shocks, and the valving is set for each application.
Key features
- Rear monotube design for a 6 inch lift
- Nitrogen gas charged
- Brushed zinc plated and clear coated body
- Multi-stage valving tuned for each application
- Includes rubber bushing
Rear lift and driveline
A rear lift on a half-ton changes the angle of the axle and the driveshaft, and the rear shocks work at a different length once the truck sits higher. Shock travel can change the way the body moves on uneven roads, so the mounts should be inspected for clean alignment. Check the pinion angle and driveline after any rear height change, since both affect vibration and wear.
When towing or carrying cargo, the rear shocks take a larger share of the load, so a worn unit can make the back end bounce or sway. Replacing the bushings and bump stops alongside the shock keeps the rear mounts tight. Inspect the body for leaks, the bushing for cracking, and the rear tires for cupping as signs the shock needs attention.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | EXPZX2122 |
| Shock series | Pro Runner |
| Position | Rear |
| Lift | 6 in |
| Charge | Nitrogen gas |
| Finish | Brushed zinc with clear coat |
| Bushing | Rubber, included |
Vehicle fitment
It fits the 2015 to 2017 Ford F-150, in XL, XLT, Lariat, King Ranch, Limited, Platinum and SSV models.
Check fit against your year, model and trim first, especially for 2009 to 2014 and 2018 and later F-150 trucks.
Installation notes
Confirm the lift on the F-150 before ordering, since the valving is tuned for a 6 inch height. The 2 inch body and the rubber bushing should be checked against the rear mounts, and the position and model year should match the truck before the shock is loaded.
With a 6 inch lift the rear suspension’s geometry changes, so check the pinion angle and the rear driveline after installation. Confirm the rear shock sits square in its mounts and that the rubber bushing is seated before the truck is loaded.
Once the rear is at ride height, confirm the shock body clears the rear bumper brackets and any tow hitch fitted to the truck.
What’s included
One rear Pro Runner monotube shock with rubber bushing under part number EXPZX2122.














