Overview
The Pro Comp Suspension 51055BX-1 is a 2.5-inch PRO-VST front coilover shock for the 2019 to 2026 Chevrolet Silverado 1500. It fits the Silverado 1500 in several trims, plus the 2019 Silverado 1500 LD.
Pro Comp builds the body from hard-anodized, thick wall impact forged metal. The 17-4 PH stainless steel shaft is chrome plated, which Pro Comp says resists corrosion and abrasion.
Key features
- 2.5-inch PRO-VST coilover body
- Hard-anodized thick wall impact forged construction
- 17-4 PH stainless steel shaft, chrome plated
- Vehicle specific tuning
Measuring before you swap
Measuring the old front shock is the most reliable way to plan a coilover swap. Record the installed length, the spring seat height and the mount positions, then compare them with the new unit. A difference in length will change ride height and can alter how the front wheels sit under the fender at full steering lock.
Front suspension work is easier with the truck safely supported and the wheel off. Keep the brake hose and steering linkage clear of the coilover body, and check that the spring is fully seated before lowering the truck. After the first few miles, recheck steering alignment because changes at the strut or shock can affect toe and camber.
- Measure the old shock’s installed length
- Check brake hose routing
- Recheck alignment after the first drive
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 51055BX-1 |
| Shock series | PRO-VST |
| Position | Front |
| Shock type | Coilover |
| Body diameter | 2.5 in |
| Charge | Gas charged |
Vehicle fitment
It fits the 2019 to 2026 Chevrolet Silverado 1500, the 2019 Silverado 1500 LD and the 2022 Silverado 1500 LTD.
Confirm fit for earlier Silverado years and the Silverado 2500 HD before ordering, since this shock is made for the 2019 to 2026 1500 range.
Installation notes
Because this is a coilover, the spring seat and mounting points set the installed height. Measure the existing front shock before removing it and compare the two. The PRO-VST is vehicle specific, so match the front position and the fitment range to your truck. After installation, check tire and coilover clearance at full steering lock.
Set the spring seat alignment before refitting the front wheel, and recheck steering geometry afterward. Confirm the brake hose and steering linkage clear the coilover body at full lock.
What’s included
One front coilover shock under part number 51055BX-1.


















