Overview
The Pro Comp 914014B is a PRO-X twin tube shock absorber with a 14.0 inch extended length and a 9.3 inch collapsed length. Pro Comp offers it in extended lengths for lifted trucks that see mostly paved roads with some off-road use.
The PRO-X is a general-purpose twin tube design with 10-stage velocity sensitive valving, which adjusts to different road conditions. The 5/8 inch chrome hardened piston rod and Teflon rebound stop support a comfortable highway ride and handle more demanding driving.
It is a direct fit for the 1986 to 1995 Toyota 4Runner and Toyota Pickup. It is sold individually.
Velocity sensitive valving changes damping with how fast the shock moves, so a slow change in the road surface and a sharp bump are not handled the same way. The 1-3/8 inch nylon banded piston and the 5/8 inch chrome hardened shaft are the main working parts of this shock.
Key features
- 10-stage velocity sensitive valving for varied road conditions
- 5/8 inch chrome hardened piston rod
- 1-3/8 inch nylon banded piston
- Nitrogen stabilized body
- Teflon rebound stop for a comfortable highway ride
- Black powder coat finish
- 2.0 inch body diameter
Setting up for mixed use
Lifted trucks that see mostly pavement with some off-road work benefit from a shock that handles both smooth and rough surfaces. Velocity sensitive valving helps the damping respond to sharp bumps and slower body motion. When choosing a setup, consider the tire size, any lift already installed, and how the truck is loaded during daily use.
Twin tube shocks should be matched in pairs at each axle so the truck handles the same on both sides. Inspect the piston rod, mounts and any dust boot after each trail trip. Early signs of wear include fluid residue, a rocking ride after a dip, and uneven tire wear. Replace worn units before they affect steering control. Bushings and bump stops should be checked at the same time.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 914014B |
| Shock series | PRO-X |
| Shock type | Twin tube, nitrogen stabilized |
| Extended length | 14.0 inch |
| Collapsed length | 9.3 inch |
| Body diameter | 2.0 inch |
| Piston | 1-3/8 inch nylon banded |
| Piston rod | 5/8 inch chrome hardened |
| Valving | 10-stage velocity sensitive |
| Finish | Black powder coat |
| Sold as | Individually |
Vehicle fitment
It is a direct fit for the 1986 to 1995 Toyota 4Runner and the 1986 to 1995 Toyota Pickup. Other Toyota models and model years are not covered.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Measure your mounting points against the 9.3 inch collapsed and 14.0 inch extended lengths before installing, so the shock has room to travel through its full range.
What’s included
One shock absorber.
Not included: the shock boot, which is sold separately.









