Overview
The Pro Comp PR2101 is a front monotube shock absorber for Chevrolet and GMC full-size trucks, Suburbans, Blazers and Jimmys from 1969 to 1991. It is made for models with a 6 inch lift and is nitrogen gas charged.
The PRO-M is a step up in off-road capability that still rides smoothly on pavement. An internal floating piston keeps the oil and nitrogen gas apart, which helps prevent the cavitation that robs performance during hard use. Multi-stage valving is tuned for each application, and the 2.0 shock body holds more oil to help it shed heat during off-road driving.
At full length the shock measures 25.8 inches extended and 16.3 inches collapsed, which matches the 6 inch lift the product is built for. Each shock is sold individually, so a pair needs two units.
Key features
- Monotube design with an internal floating piston
- Nitrogen gas charged
- Multi-stage disc pack with vehicle specific valving
- 2.0 shock body with increased oil capacity
- 14mm chrome hardened shaft
- Wiper seal design that Pro Comp says prevents leaks
- Silver powder coat finish
Lift and alignment checks
A 6 inch lift changes the geometry of the front end, which affects how the shock works through its travel. Because a higher ride height moves the lower mount, the shock may reach its limits sooner than it did stock, so check the extension and compression once the new parts are in place.
Older full-size trucks often have worn steering links, ball joints and sway bar bushings. Replacing a shock on a worn front end will not restore the feel of a new setup, so inspect those components while the wheels are off. Tire wear patterns can also show whether the geometry has changed.
Keep the boot clean and check it for cracks after off-road trips, since mud and grit can work into the shaft area over time.
- Check shock travel after the lift is installed
- Inspect sway bar links and bushings
- Look for uneven tire wear after alignment
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | PR2101 |
| Location | Front |
| Shock series | PRO-M |
| Shock type | Monotube |
| Gas charge | Nitrogen gas charged |
| Extended length | 25.8 inches |
| Collapsed length | 16.3 inches |
| Lift | Built for a 6 inch lift |
| Shaft | 14mm chrome hardened |
| Boot | Polyurethane shock boot included |
| Sold as | Individually |
Vehicle fitment
It fits Chevrolet and GMC K and V series trucks and Suburbans from 1969 through 1991, the Chevrolet and GMC Blazer and Jimmy, and the 1987 and 1987-1988 V10 and V20 models.
The list stops at 1991, so later Silverado and Sierra generations are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A 6 inch lift changes ride height and shock geometry, so check the new front shock’s full extension and compression once the lift is in. An alignment is usually needed after a lift like this.
What’s included
One front shock absorber with its polyurethane shock boot.
Not included: the second front shock, because this shock is sold individually.









