Overview
The Pro Comp PRO-M Monotube Rear Shock Absorber PR2019 is a gas-charged rear monotube shock that fits the 2004–2008 Ford F-150 with 0-3 inch lift.
The PRO-M separates oil from the nitrogen gas charge with an internal floating piston and uses multi-stage valving tuned to each application. Extended and collapsed lengths are 26.7 inches and 16.9 inches. It has loop mounts at both ends, a silver powder coat finish and catalog number EXPPR2019.
The PR2019 is sized for factory-height and mildly lifted trucks with up to 3 inches of lift. The PRO-M line is built for stronger off-road performance, with quick reaction and steady ride quality on trails and on the drive home.
The 2.0 shock body adds oil capacity to improve heat dissipation during off-road use. A redesigned wiper seal is designed to keep the shock from leaking.
Key features
- Monotube rear shock, PRO-M series
- Nitrogen gas charged with an internal floating piston
- Vehicle-specific valving and multi-stage disc pack
- 14mm chrome hardened shaft
- 2 in. diameter body with added oil capacity
- Extended length 26.7 inches, collapsed length 16.9 inches
- Polyurethane shock boot included
- Sold individually
Choosing a rear shock
A rear shock controls how the axle moves over bumps and how quickly the body settles after a compression or rebound. On a truck near factory height, the shock mainly handles daily road loads, so the damping rate and mount style matter as much as the length. When choosing a replacement, measure the installed length of the old shock with the suspension at rest, then compare it with the extended and collapsed figures before you buy.
Shocks are often replaced in pairs on the same axle, since a worn unit on one side can leave the truck feeling uneven. Look at the mounts for cracked eyelets, bent brackets and seeping oil around the body and shaft. A shock that leaks or knocks over small bumps is usually past its useful life.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | PR2019 |
| Catalog number | EXPPR2019 |
| Part type | Rear shock absorber |
| Series | PRO-M |
| Shock type | Monotube |
| Position | Rear |
| Extended length | 26.7 in |
| Compressed length | 16.9 in |
| Upper mount | Loop (eyelet) |
| Lower mount | Loop (eyelet) |
| Body diameter | 2 in. |
| Shaft | 14mm chrome hardened |
| Finish | Silver powder coat |
| Charge | Nitrogen gas charged |
| Lift height | 0-3″ |
| Quantity | Sold individually |
| Fit type | Direct fit |
Vehicle fitment
The manufacturer fitment list for the Pro Comp PR2019 covers the 2004–2008 Ford F-150 in the FX2, FX4, Harley-Davidson Edition, King Ranch, Lariat, Limited, STX, THE 60TH ANNIVERSARY EDITION, XL and XLT trims.
It fits 2004–2008 F-150 models in the FX2, FX4, Harley-Davidson Edition, King Ranch, Lariat, Limited, STX, THE 60TH ANNIVERSARY EDITION, XL and XLT trims, with 0-3 inch lift. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Shocks are part of the steering and braking chain, so a professional installer is a sound choice. Tighten the mounting hardware to the specified torque, recheck it after the first drive, and look at the wheel alignment afterward. Rear shock changes usually need no alignment, but a check is cheap.
What’s included
The Pro Comp PR2019 comes as one rear shock absorber with a polyurethane shock boot.









