Overview
The Skyjacker FBL42 (part number SKYFBL42) is a pair of stainless steel braided front brake lines for the 1974-1975 Jeep CJ5 and CJ6 with a 2.5 to 4 inch lift.
Each hose has a brass fitting built for off-road use and an extruded polyurethane coating. The set is DOT certified, European T.U.V. approved and legal for street use in all 50 states.
Key features
- Direct-fit front hoses for the 1974-1975 CJ5 and CJ6
- Stainless steel braided hose
- Brass fitting built for off-road use
- Extruded polyurethane coating
- DOT certified and European T.U.V. approved
- Limited lifetime warranty
CJ5 and CJ6 front brakes
CJ5 and CJ6 front axles have limited room, and a lift adds travel that can strain a stock line. Braided stainless hose is less likely to balloon under pedal force than rubber, so the pedal stays more consistent. Front lines also run near the steering knuckles and tie rod, so routing and clearance should be checked during installation.
Replacing the front hoses is a good time to inspect calipers, pads and rotors, since all front brake parts affect stopping. Check the old hoses for hardening or cracking first, and look for seepage around the fittings. Once everything is connected, bleed the brakes thoroughly and test the pedal at low speed before driving normally.
- Check steering clearance after installing
- Inspect caliper slides when hoses are replaced
- Use fresh brake fluid when refilling
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | SKYFBL42 |
| Product type | Stainless steel braided brake hose |
| Hose material | Stainless steel |
| Fitting | Heavy-duty off-road brass |
| Outer coating | Extruded polyurethane |
| Position | Front |
| Lift height | 2.5 to 4 inches |
| Quantity | Pair |
| Fit type | Direct fit |
Vehicle fitment
It fits the 1974-1975 Jeep CJ5 (Base, Renegade) and the 1974-1975 Jeep CJ6 (Base).
Other CJ years and models are not on the list. Confirm your vehicle’s year, model and trim before ordering.









