Overview
The Pro Comp K5069BPS is a 6-inch Stage 1 lift kit with Pro Runner SS front shocks for the 2007–2018 Toyota Tundra. The front has a crossmember, steering knuckles and compression struts, and the rear is lifted with lift blocks, U-bolts and add-a-leafs.
The front package also has front and rear crossmembers, front sway bar spacers and bump stop extensions. Brake line extension brackets are included, and the front shocks are Pro Runner SS units.
Key features
- 6-inch lift height from a Stage 1 kit
- Crossmember and steering knuckles
- Compression struts
- Front and rear crossmembers
- Front sway bar spacers and bump stop extensions
- Brake line extension brackets and block and U-bolt rear lift
Front shock choices and wear
Front shock choice matters on a lifted truck because the shock must reach its full extension and compression at the new ride height. Shock length, mounting position and damping all affect how the truck absorbs bumps and keeps its tires in contact. A shock that works well at stock height may feel wrong once the front is raised.
Related parts are often replaced alongside shocks. Sway bar links, brake lines and bump stops all interact with the front suspension travel, so inspect them when shocks are changed. Bump stop extensions in particular should contact without binding when the suspension is compressed.
Shocks wear gradually, so a slow change in ride quality is easy to miss. Check for fluid on the body, bouncy handling and uneven tire wear during routine service.
- Check shock length and mounting position
- Inspect sway bar links at each service
- Look for fluid on the shock body
- Confirm bump stops clear at full compression
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | K5069BPS |
| UPC | 70000638108 |
| Lift height | 6 inch (lift height range 5 to 6.99 inches) |
| Lift kit stage | Stage 1 |
| Suspension type | Knuckle |
| Front control | Crossmember, steering knuckles and compression struts |
| Rear lift | Lift blocks, U-bolts and add-a-leafs |
| Front shocks | Pro Runner SS |
Vehicle fitment
Fitment covers 2007–2018 Toyota Tundra trucks in the 1794 Edition, Base, Limited, Platinum, SR, SR5 and TRD Pro trims.
The list covers the 2007 through 2018 model years, so the 2006 and earlier trucks and the 2019 and newer generation are not included. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Changing the crossmember and knuckle geometry affects the steering and front alignment, so schedule an alignment and check the brake lines for clearance after installation.
What’s included
The kit includes the front and rear crossmembers, steering knuckles, compression struts, front sway bar spacers, bump stop extensions, brake line extension brackets, the block and U-bolt rear lift with add-a-leafs, and Pro Runner SS front shocks.









