Overview
The K2103B is a 6-inch stage 1 suspension system with ES9000 front shocks for the 2019–2021 Ram 1500. The lift height range is 6 to 7 inches, and the front shocks are ES9000 units.
The kit uses a new knuckle engineered for the 2019 Ram 1500 platform, designed for better steering geometry, lower weight and a tighter turning radius than the earlier generation. Crossmembers, diff drops and sway bar drops are matched to it to keep critical components near factory operating angles.
Key features
- New Pro Comp-engineered knuckle for the 2019 Ram 1500 platform
- Robust crossmembers, diff drops and sway bar drops
- Rear geometry correction brackets and coil spacers
- Compatible with factory stability control and adaptive cruise control.
- Clearance of up to a 37-inch tire
Steering and tire fit
A new knuckle changes how the front wheels turn and how the tires sit at full lock, so steering feel and tire fit are linked. Take the truck for a short test drive in an empty lot at low speed and watch for rubbing at both extremes of steering. An alignment after installation should set caster and toe, since those settings control straight-line tracking.
Front shocks do much of the work for ride control, so keep an eye on their condition after the lift, especially if the rear feels different from the front. Wheel bearings can take extra load when tire size or ride height changes, so check for play and noise during tire rotations. Lug nuts and hub bolts should be rechecked after the first few trips to make sure they remain tight.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | K2103B |
| Suspension type | Lift kit, 6-inch stage 1 |
| Lift height | 6 inches, listed range 6–7 inches |
| Front shocks | ES9000 |
| Rear shocks | None listed |
| Rear components | Rear geometry correction brackets and coil spacers |
| Tire clearance | Up to 37-inch tires |
| Fitment | Direct fit |
Vehicle fitment
It fits the 2019–2021 Ram 1500 in the Big Horn, HFE, Laramie, Laramie Longhorn, Limited, Limited Longhorn, Lone Star, Longhorn, Rebel, Special Service, TRX, TRX Launch Edition and Tradesman versions.
Coverage runs through the 2021 model year, so 2022 and newer Ram 1500 trucks are outside it, and the Ram 2500 and 3500 are not covered. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
The crossmembers and diff drops are designed to keep operating angles close to factory, but the lift still changes driveline and alignment settings. Check both after installation.
What’s included
Pro Comp’s description names the knuckles, crossmembers, diff drops, sway bar drops, rear geometry correction brackets and coil spacers as parts of the system. The specifications list ES9000 front shocks and no rear shocks.




























