Overview
The Pro Comp K5156T is a 6-inch Stage 1 lift kit with PRO-X shocks for the 2015 to 2024 Toyota 4Runner. Pro Comp designed it to raise the 4Runner’s stance while keeping the factory steering and driveline geometry in place.
Reinforced bump stop extensions allow the full range of compression and extension travel without binding the ball joints. Longer rear coils with spring rates Pro Comp describes as ideal for the lift, custom valved shocks and extended rear axle links complete the system, which the company says supports the 4Runner’s durability.
Key features
- 6-inch lift height in a Stage 1 kit
- Reinforced bump stop extensions that allow full travel without binding ball joints
- Extended nodular iron steering knuckles
- One-piece lower cross members that Pro Comp describes as rock proof
- Longer rear coils and custom valved shocks
- Extended rear axle links
Tire size and clearance
Tire clearance is one of the main reasons owners lift a 4Runner, and it depends on tire diameter, width and wheel offset as well as the lift itself. Before buying tires, check how the new height changes fender and inner liner clearance, and plan for trimming or spacers where needed. Compare the planned tire with the lift height rather than assuming any size will fit.
The 4Runner’s steering, driveline and brake lines all sit close to the suspension, so tire changes affect more than fender room. Larger tires add rotational weight and change how the drivetrain feels, so the speedometer and driveline should be checked after installation. Inspect steering stops and brake lines at full lock.
- Check tire diameter against the planned lift
- Look for rub points at full steering lock
- Verify the speedometer after changing tire size
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | K5156T |
| Lift height | 6 inches |
| Kit type | Stage 1 lift kit |
| Shocks | PRO-X, custom valved |
| Steering knuckles | Extended nodular iron |
| Lower cross members | One-piece |
| Rear coils | Longer, with spring rates for the lift |
Vehicle fitment
It fits the 2015 to 2024 Toyota 4Runner across its trim levels.
It does not cover 4Runner model years before 2015 or other Toyota models. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A 6-inch lift changes ride height and suspension geometry, so have the wheel alignment and the driveline angles checked after installation. The extended steering knuckles and lower cross members are there to keep the steering rack and front differential in place, but the alignment still needs to be set on the new height.
What’s included
The kit includes the PRO-X shocks, extended steering knuckles, one-piece lower cross members, longer rear coils, reinforced bump stop extensions and extended rear axle links.




























