Overview
The Pro Comp K5080T is a 6-inch stage 1 suspension lift for the 2012–2015 Toyota Tacoma. PRO-X front and rear shocks are part of the kit, and the lift height range is 6 to 7 inches.
The rear uses a block/spacer method with block and U-bolt components and add-a-leaf hardware. It is built for the Base, Pre Runner, TRD Pro and X-Runner versions of the 2012–2015 Tacoma, which sits between the 2005–2011 and 2016–2022 Tacoma generations.
Key features
- 6-inch stage 1 lift for the 2012–2015 Tacoma
- PRO-X front shocks and PRO-X rear shocks, both included
- Block and U-bolt rear lift with add-a-leaf hardware
- Lift height range of 6 to 7 inches
- It fits the TRD Pro version of the 2012–2015 Tacoma.
Brakes and wiring after a lift
Raising a truck’s suspension moves the wheels and axle relative to the frame, and that stretches or rotates the components that connect them. Flexible brake hoses can come under tension at full droop, and the wiring that runs to the ABS sensors can be pulled tight. Both are worth inspecting after the lift is complete, with the truck at full suspension extension.
Parking brake cables and the lines that run along the frame are also affected in some setups. Look for kinks, rubbing on the frame or axle, and cracking at the rubber sections. Replacing worn brake hoses while the suspension is apart is a common step, since access is easier at that point.
- Check flex hoses at full droop
- Inspect ABS sensor wire routing and clips
- Look for rub points on the frame and axle
- Test the parking brake after reconnecting cables
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | K5080T |
| Suspension type | Lift kit, stage 1 |
| Lift height | 6 inches, listed range 6–7 inches |
| Front shocks | PRO-X |
| Rear shocks | PRO-X, included |
| Rear lift method | Block/spacer with block and U-bolt and add-a-leaf |
| Shocks included | Yes |
Vehicle fitment
It fits the 2012–2015 Toyota Tacoma in the Base, Pre Runner, TRD Pro and X-Runner versions.
Fit falls within 2012–2015 Tacoma models, outside the 2005–2011 and 2016 and newer Tacoma, the 4Runner and the Tundra. Verify your truck’s year, model and trim before you order.
Installation notes
Changing the Tacoma’s ride height changes the driveline angles and the front alignment, so have both checked after the lift is installed and the truck is back on its wheels.
What’s included
PRO-X front and rear shocks, and the block and U-bolt rear lift components with add-a-leaf hardware.













