Select your vehicle

Pro Comp 3 Inch Lift Kit with ES3000 Shocks – K3059B

Pro Comp Suspension

Shop Jeep Grand Cherokee ZJ Lift Kits on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • 3-inch front and 2.5-inch rear coil spring lift with ES3000 shocks
  • Designed for 1993–1998 Jeep Grand Cherokee (ZJ) models
  • Front kit and rear kit both included, with a sway bar link kit
  • Black finish with front and rear ES3000 shock absorbers

Description

Overview

The Pro Comp K3059B is a 3-inch front and 2.5-inch rear suspension lift for 1993–1998 Jeep Grand Cherokee (ZJ) models. It suits Base, Laredo, Limited, SE, TSi, Orvis and 5.9 Limited trims.

The box holds a front kit and a rear kit. The front kit includes coil springs and a sway bar link kit, and the rear kit adds rear springs to complete the lift. ES3000 front and rear shocks are supplied in black.

Key features

  • 3-inch front lift and 2.5-inch rear lift
  • Front coil springs
  • Sway bar link kit
  • Rear springs
  • ES3000 front and rear shocks, black finish
  • Front kit and rear kit both included

Setting the two heights

A front and rear lift of different heights creates a built-in angle through the body, which is worth understanding before setting the ride. The difference affects steering geometry, driveline angles and how the tires wear across both axles. Measuring each corner before and after installation gives a clear picture of how the truck sits and whether any adjustment is needed.

The ES3000 front and rear shocks should suit both heights, so check their length during installation. Coil springs in the front kit and rear springs in the rear kit carry the new weight, so inspect the spring seats and rubber isolators at routine service. Those parts see the new height every day, so small wear shows up early if you look for it.

  • Measure all four corners before and after
  • Check alignment once the front is at final height
  • Inspect spring seats at each oil change

Specifications

Brand Pro Comp Suspension
Part number K3059B
UPC 614901123067
Lift 3 inches front, 2.5 inches rear, stage 1
Lift height range 3 to 4.99 inches
Suspension type Coil spring and short arm
Rear lift method Coil springs
Front shocks ES3000
Rear shocks ES3000
Finish Black

Vehicle fitment

It is designed for 1993–1998 Jeep Grand Cherokee (ZJ) models. Other Grand Cherokee generations, including the 1999–2004 WJ, fall outside its coverage, and the Cherokee (XJ) is not covered either.

Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Because the front and rear heights differ, check the ride height at all four corners after installation and set the alignment once the front is at its final height.

What’s included

The box contains a front kit with front coil springs and a sway bar link kit, a rear kit with rear springs, and ES3000 front and rear shocks.

SKU: EXPK3059B Category:

Specification

Shipping weight 107.12 lbs
Package dimensions 0.00 × 0.00 × 0.00 in
brands

Fitment

VehicleYearsTrims
Jeep Grand Cherokee (ZJ)1993–19985.9 Limited, Base, Laredo, Limited, Orvis, SE, TSi

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Is the K3059B a 3-inch lift at both ends?

No. The front is listed at 3 inches and the rear at 2.5 inches, so the front and rear heights differ. The box includes a front kit and a rear kit, with ES3000 shocks at both ends.

Does the K3059B fit a 1997 Grand Cherokee ZJ?

Yes. It is designed for 1993–1998 Jeep Grand Cherokee (ZJ) models, which includes 1997 trucks. Confirm the trim and model year against your vehicle before ordering.

Is the Grand Cherokee WJ covered by this kit?

No. The kit is designed for the ZJ generation from 1993 to 1998, so the WJ generation from 1999 to 2004 falls outside its coverage. Confirm the model and year on your vehicle before buying.

What is rake, and why does a front-to-rear height difference matter?

Rake is the difference in height between the front and rear of the truck. When the front and rear lifts differ, the body sits at an angle, which can affect steering geometry and tire wear. Measure both ends after installation and compare the result with the planned height.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Jeep Grand Cherokee ZJ Lift Kits on Amazon