Overview
The Pro Comp Nitro 64660K is a 2.5 inch leveling lift kit, part number 64660K, for the 2005–2012 Nissan Frontier, the 2005–2012 Nissan Xterra and the 2009–2012 Suzuki Equator. Pro Comp describes Nitro kits as an economical alternative to a complete suspension system.
The kit lifts the front with strut spacers and the rear with lift blocks and U-bolts. The front lift keeps factory steering geometry intact, so factory ride quality and handling are preserved, and it suits owners who want larger wheels and tires without a full suspension lift.
Key features
- 2.5 inch lift height
- Front strut spacers that keep factory steering geometry in place
- Rear lift with lift blocks and U-bolts
- Maximum tire size of 33 inch
- All necessary hardware and instructions included
- Black finish with steel spacers
Driveline and tire checks
Lifting the rear with blocks and U-bolts changes the angle of the driveshaft, which can cause vibration or wear on the U-joints if left unchecked. The front strut spacers keep the factory steering geometry, but they still change ride height, so the two ends need to be balanced. Check both ends once the kit is installed.
Tire size matters on this kit because a larger tire can rub the fender or the frame at full lock and at full compression. Keep the tire height at or below the stated maximum and check clearance with the steering turned to each side. Shocks and brake lines should also be inspected for stretch or contact after the lift.
- Check driveshaft angles after the blocks are installed
- Measure tire clearance at full steering lock
- Inspect U-joints for play after the first drives
- Re-torque U-bolt nuts after the first few drives
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 64660K |
| UPC | 614901022391 |
| Lift height | 2.5 inch |
| Front lift method | Strut spacers |
| Rear lift method | Lift blocks and U-bolts |
| Finish | Black |
| Spacer material | Steel |
| Maximum tire size | 33 inch |
Vehicle fitment
It fits the 2005–2012 Nissan Frontier, the 2005–2012 Nissan Xterra and the 2009–2012 Suzuki Equator.
Confirm fit for your vehicle’s year, model and trim before ordering, especially for Frontier or Xterra years outside 2005–2012 and Equator years before 2009.
Installation notes
Wheel alignment is required after installation. The rear lift changes the driveline angle, so check the driveshaft angles once the blocks and U-bolts are in place, and keep the tire size at or below 33 inch.
What’s included
The kit includes all necessary hardware and instructions.









