Select your vehicle
-13%

Pro Comp PRO-M Monotube Front Shock Absorber – PR2108

Pro Comp Suspension

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Front monotube shock, 17.7-inch extended and 14.5-inch collapsed length
  • Fits 2014-2017 Chevrolet Silverado 1500 and GMC Sierra 1500
  • Nitrogen gas charge, floating piston and multi-stage valving
  • 14mm chrome hardened shaft, polyurethane boot included
  • Part number PR2108, sold individually

Description

Overview

The Pro Comp PRO-M PR2108 is a front monotube shock absorber with a 17.7-inch extended length and a 14.5-inch collapsed length, sold individually. It is made for 2014-2017 Chevrolet Silverado 1500 and GMC Sierra 1500 trucks with 0 to 2 inches of lift.

The monotube design uses an internal floating piston to separate the oil from the nitrogen gas charge, which Pro Comp says prevents cavitation. The multi-stage valving is tuned for each application, and the 2.0-inch shock body gives extra oil capacity to help the shock shed heat during off-road use.

The new wiper seal design is intended to keep the shock from leaking. The PRO-M is built for off-road use while still giving a smooth ride on the road.

In a monotube shock, a single pressure tube holds the oil and the nitrogen gas, separated by a piston, rather than splitting them between two tubes. The PRO-M is a front position shock.

When comparing this shock with the one it would replace, check the 17.7-inch extended length and the 14.5-inch collapsed length first, since those set the range of motion the shock allows. The 14mm chrome hardened shaft and the included polyurethane boot complete the listed specifications.

Key features

  • Monotube design with an internal floating piston
  • Nitrogen gas charge
  • Multi-stage valving, vehicle specific
  • 14mm chrome hardened shaft
  • 2.0-inch shock body for increased oil capacity
  • Wiper seal design
  • Polyurethane shock boot included

Matching the shock to your use

A front shock on a half-ton pickup does most of its work on pavement, with occasional gravel and washboard. The valving determines how firmly the shock controls body motion, so a shock tuned for the vehicle will feel more settled than a generic unit when the truck is loaded or towing.

Regular checks help keep the front end predictable. Look at the shock body for oil film, check that the boot is intact and feel for play at both mounts. If the truck pulls or the steering feels vague, inspect the tie rods and ball joints along with the shock.

Replacing a pair at the same time keeps the two front corners behaving alike, which matters for steering stability under braking.

  • Inspect the boot after off-road trips
  • Check mount bushings for play
  • Compare tire wear on both front tires

Specifications

Brand Pro Comp Suspension
Part number PR2108
Shock series PRO-M
Position Front
Shock type Monotube, gas charged
Extended length 17.7 inches
Collapsed length 14.5 inches
Body diameter 2.0 inches
Shaft 14mm chrome hardened
Valving Multi-stage disc pack, vehicle specific
Lift range 0 to 2 inches
Finish Silver powder coat
Boot Polyurethane, included
Fitment Direct fit

Vehicle fitment

It fits the 2014-2017 Chevrolet Silverado 1500 in several trims, and the 2014-2017 GMC Sierra 1500 in several trims.

The list does not include the 2018 and later Silverado or Sierra 1500 trucks, or any heavy duty models.

Confirm your vehicle’s year, model and trim before ordering.

What’s included

One front shock absorber with a polyurethane shock boot.

Fitment

VehicleYearsTrims
Chevrolet Silverado 15002014–2017Custom, High Country, LS, LT, LTZ, SSV, WT
GMC Sierra 15002014–2017Base, Denali, SLE, SLT

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Does the Pro Comp PR2108 fit a 2015 Chevrolet Silverado 1500?

Yes. The PR2108 fits the 2014-2017 Chevrolet Silverado 1500, which covers 2015 models. It also fits the GMC Sierra 1500 in the same years.

Is the PRO-M a monotube shock?

Yes. It uses a monotube design with an internal floating piston that separates the oil from the nitrogen gas charge, which Pro Comp says prevents cavitation during compression and rebound.

What shaft size does it have?

The shaft is 14mm and chrome hardened, and the shock has a silver powder coat finish. It is made for vehicles with 0 to 2 inches of lift.

Does it include a boot?

Yes. A polyurethane shock boot is included with the PRO-M. The shock is sold individually, so each front position needs its own shock.

What is the difference between a monotube and a twin-tube shock?

A monotube shock keeps oil and gas in one tube, separated by a floating piston, which helps it keep damping steady as it heats. A twin-tube shock uses two tubes. The monotube design is often chosen for heavier use and off-road driving.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon