Overview
The Pro Comp PRO-M monotube rear shock, part number PR2067, is made for vehicles with 0 to 2 inches of lift. It fits 2004-2008 Ford F-150 models.
In a monotube shock the oil and the nitrogen gas share one pressure tube, separated by a floating piston. That separation is designed to eliminate cavitation, the foaming of oil that can rob damping.
The PRO-M uses an internal floating piston to keep oil separate from the nitrogen gas charge, which helps eliminate cavitation. Its 2.0 inch shock body holds more oil to help dissipate heat during off-road use, and the multi-stage valving is vehicle specific. It is built for off-road use with a smooth ride on the road.
Key features
- Monotube design with an internal floating piston
- Multi-stage disc pack valving, vehicle specific
- 14 mm chrome hardened shaft
- Nitrogen gas charged
- Polyurethane shock boot included
- Wiper seal design, which Pro Comp says prevents leaks
Rear shock service for the F-150
A rear shock on an F-150 handles rebound after bumps and helps control the axle when the bed carries weight. Because the shock is always working, small losses in damping can show up as a floaty feel on the highway before they are obvious anywhere else.
Routine checks are simple. Look for oil film on the body, check the boot for tears, and confirm the upper and lower mounts are tight and free of cracks. Nitrogen gas charged shocks should feel firm when compressed by hand with the unit off the truck, and any uneven resistance is a sign to inspect further.
Bump stops and spring seats should be checked when a shock is replaced, since they carry load at the end of travel.
- Look for oil film on the shock body
- Check the boot for tears
- Inspect mounts for cracks or looseness
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | PR2067 |
| Shock series | PRO-M |
| Shock type | Monotube |
| Location | Rear |
| Extended length | 24.6 inches |
| Collapsed length | 15.9 inches |
| Body diameter | 2.0 inches |
| Shaft | 14 mm chrome hardened |
| Valving | Multi-stage disc pack, vehicle specific |
| Charge | Nitrogen gas |
| Upper and lower mounts | Eyelet or loop at both ends |
| Boot | Polyurethane, included |
| Lift range | 0 to 2 inches |
| Finish | Silver powder coat |
Vehicle fitment
It fits 2004-2008 Ford F-150 models.
Measure the extended and collapsed lengths of the shock you are replacing, with the eyes at both ends. The PR2067 lists 24.6 inches extended and 15.9 inches collapsed, so compare those figures with your measurements before ordering.
F-150 models from 2009 onward, and other Ford models, are not on the list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Mounts are eyelet or loop types. Check the mounts on your truck and confirm your lift falls within 0 to 2 inches before ordering.
What’s included
One rear shock with a polyurethane boot. It is sold individually.









