Overview
The Power Stop Z36-1316 is a pair of Z36 Truck and Tow front brake pads with hardware, made of a carbon and ceramic formula for the 2007–2018 Sprinter 2500 and 2016–2021 Mercedes-Benz Metris.
Carbon fiber is blended into the low-dust ceramic compound for added strength. The pads are an upgrade over stock brakes for drivers who tow and haul and for off-road use. They reduce brake dust and noise and deliver severe-duty stopping power on trucks and vans. Stainless-steel hardware and ceramic brake lubricant are included, and the pads are chamfered and slotted like the originals, with a powder coated backing plate and noise insulating shims.
Key features
- Front brake pads, sold as a pair
- Carbon and ceramic formula, thermal scorched
- Low-dust ceramic compound infused with carbon fiber
- Chamfered and slotted like OE
- Powder coated backing plate
- Noise insulating shims
- Stainless-steel hardware and hi-temp ceramic brake lubricant included
Before you buy
Severe-duty pads matter most when a van is loaded. Towing and hauling add heat to the brakes, and pads that handle heat well help keep stopping distance consistent on long grades. Before you buy, look at how the vehicle is used: a van that carries heavy cargo or pulls a trailer puts more load on the front pads than one used only for commuting.
When the pads are replaced, the rotors are the part most often overlooked. Check rotor surface, thickness and runout, and replace or resurface them if they are worn or scored. Clean the caliper slides and inspect the hoses while the wheels are off, since a sticking slide can wear new pads unevenly.
- Check rotor condition before fitting new pads
- Clean and lubricate caliper slide pins
- Replace worn hardware with new clips
- Bed in the pads gently before towing
Specifications
| Brand | Power Stop |
|---|---|
| Part number | Z36-1316 (also shown as PSTZ36-1316) |
| Product type | Front brake pads with hardware |
| Series | Z36 Truck and Tow |
| Position | Front |
| Pad material | Carbon and ceramic formula |
| Backing plate | Powder coated |
| Shims | Noise insulating |
| Hardware | Stainless steel, with hi-temp lubricant |
| Quantity | Sold as a pair |
| Fitment type | Direct fit |
Vehicle fitment
The manufacturer fitment list for the Power Stop Z36-1316 covers these vehicles: 2007–2009 Dodge Sprinter 2500 (Base); 2007–2018 Freightliner Sprinter 2500 (Base); 2016–2021 Mercedes-Benz Metris (Base); 2010–2018 Mercedes-Benz Sprinter 2500 (Base).
This pad set fits the Sprinter 2500 and Metris in Base trim only. Other Sprinter weights, such as 1500 and 3500, and other vans are not covered. Rotors are not part of this pad set, so check their condition when you replace the pads. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Brakes are a safety system, so professional installation is recommended. Follow the torque values and break-in steps that apply to these pads.
- Inspect the related brake hardware, hoses and fluid while the brakes are apart.
- Bed in new pads with a gentle break-in routine before relying on full stopping force.
- Test the brakes at low speed in a safe area before returning to normal driving.
What’s included
- Front brake pads (a pair)
- Stainless-steel hardware
- Ceramic brake lubricant (hi-temp lubricant)
- Noise insulating shims
Not included: Rotors and calipers are not included.











