Overview
The Power Stop Z36-1068 is a set of rear Z36 Truck and Tow brake pads for the 2005-2007 Ford F-250 and F-350 Super Duty. Power Stop says they are made for trucks and SUVs with higher gross vehicle weights that haul loads or tow trailers.
The pads use a carbon and ceramic formula with a thermal scorched, chamfered and slotted design like OE, a powder coated backing plate and noise insulating shims. The coefficient of friction is 17 percent higher than OE pads, and the pads are designed to resist high temperature brake fade.
Key features
- Carbon and ceramic formula
- Thermal scorched surface
- Chamfered and slotted like OE
- Powder coated backing plate
- Noise insulating shims
- Hi-temp lubricant included
- Coefficient of friction 17 percent higher than OE pads.
- Made for trucks and SUVs that haul or tow
Rear pads on heavy-duty trucks
Rear brakes on a Super Duty truck work during every stop, and load changes how hard they work. Carbon and ceramic pads give steady friction across a range of temperatures, which suits a truck that moves between empty runs and trailer loads. Rear rotors can wear unevenly, so check them whenever the pads are changed.
When rear pads are replaced, inspect the caliper slide pins, the bracket and the hoses. Clean rust from the mounting surfaces and make sure the new pads move freely. Bed the set in gently, then recheck the work after the first few miles of driving. A rear brake that drags or runs hot often points to a sticking caliper rather than the pads.
- Check parking brake adjustment
- Inspect the rear rotor surface
- Clean the caliper bracket before fitting
Specifications
| Brand | Power Stop |
|---|---|
| Part number | Z36-1068 |
| UPC | 792088521927 |
| Product type | Disc brake pads (Z36 Truck and Tow) |
| Position | Rear |
| Compound | Carbon and ceramic formula |
| Caliper | Stock |
| Type | Upgrade |
| Friction | 17 percent higher coefficient of friction than OE (per Power Stop) |
| Backing plate | Powder coated |
| Shims | Noise insulating |
| Lubricant | Hi-temp lubricant included |
| Fit type | Direct fit |
| Manufacturer part code | PSTZ36-1068 |
Vehicle fitment
Fits the 2005-2007 Ford F-250 Super Duty (Harley-Davidson Edition, King Ranch, Lariat, XL, XLT) and the 2005-2007 Ford F-350 Super Duty (King Ranch, Lariat, XL, XLT).
The stored list covers the 2005-2007 Ford F-250 and F-350 Super Duty only. Other model years and front brake pads are different parts. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Bed in new pads at low speed before towing or hauling. Brake parts are safety-critical, so professional installation is a sound choice. Keep friction surfaces and rotors free of oil and grease, follow the torque values for the wheel and caliper hardware, and test the brakes at low speed in a safe area before normal driving. Re-check the work after the first miles of driving.
What’s included
- Rear brake pads
- Noise insulating shims
- Hi-temp lubricant









