Overview
The Power Stop JBR1398XPR is a rear slotted and cross-drilled brake rotor for the 2007–2015 Mazda CX-9. The coated finish is meant to resist rust during normal operation, and the slots keep the pad contact patch clear.
The JBR1398XPR is for owners of the 2007–2015 Mazda CX-9 who want a rear rotor with a slotted and cross-drilled face rather than a plain disc. Match the rotor to your vehicle’s year, model and axle before ordering.
Matching a rotor to your vehicle by year, model and axle matters more than any single feature, because mounting dimensions differ between models.
Key features
- Slotted and cross-drilled rear rotor
- Direct fit for the listed vehicles
- G3000 grade cast
- Slots keep a clear contact patch between pad and rotor
- Rotor run-out within 0.0015 and DTV tolerance within 0.005
- Coated rotor
- Rounded slots that sweep water, gas and dust from the pad contact patch
- Silver zinc plated to shield against rust during normal operation
- Cross-drilled holes that Power Stop says keep rotors up to 180°F cooler
Choosing a rear rotor
Rear rotors take less of the braking load than fronts on most vehicles, but they still see heavy use in towing, mountain descents and repeated stops. A slotted and cross-drilled face helps clear pad dust and gas from the contact surface, which can keep braking more even when the rotor is hot. Those features do not change the basic job of the part, so the rotor should be matched to the axle and pads it works with.
When replacing rear rotors, it is usual to change both sides together so the braking force stays balanced. Pads should be changed at the same time and bedded in gradually. Check the rear parking brake function after installation, since some rear setups use the rotor hat for it. Inspect the rotor face for deep grooves, blue heat marks or a pulsing pedal, which point to wear or overheating.
Specifications
| Brand | Power Stop |
|---|---|
| Part number | JBR1398XPR |
| UPC | 792088945341 |
| Product type | Slotted and cross-drilled disc brake rotor |
| Position | Rear |
| Fit type | Direct fit |
| Coating | Rotors coated |
| Casting | G3000 grade cast |
| Plating | Silver zinc |
| Machining | Tru-Cast precision machined |
| Rotor run-out | Within 0.0015 |
| DTV tolerance | Within 0.005 |
| Balance | Mill balanced |
Vehicle fitment
It fits the 2007–2010 and 2013–2015 Mazda CX-9 in Grand Touring, Sport and Touring trims.
Measure the rotor diameter, thickness, bolt pattern and weight against the rotor you are replacing before installing.
The fit covers 2007–2010 and 2013–2015 CX-9 models only. Verify your year, model and trim before ordering.
Installation notes
Keep brake fluid and grease off the rotor surface during installation.
What’s included
The JBR1398XPR is a brake rotor and comes with no additional parts.
Not included: Pads, calipers and hardware are sold separately and are not included.









