Overview
The Power Stop AR8596XPR is a front slotted and cross-drilled brake rotor for the 2004–2008 Ford F-150 and the 2006–2008 Lincoln Mark LT. The AR8596XPR is made for the front axle, uses cross-drilled holes together with slots, and arrives coated.
Holes and slots share the work: the holes help lower rotor temperature in extreme braking, and the slots sweep a clear contact patch between pad and rotor to reduce fade.
The AR8596XPR suits owners of 2004-2008 Ford F-150, 2006-2008 Lincoln Mark LT who want a drilled and slotted look and the cooling holes Power Stop describes, in a direct-fit front rotor that arrives coated.
Key features
- Cross-drilled holes for cooling
- Rounded slots clear water, gas and dust
- Silver zinc plating resists rust
- G3000 grade casting
- Tru-Cast precision machining
- Beveled, precision-drilled holes
- Reduces brake fade
- Evolution rotor, mill balanced
- Run out within 0.0015, DTV tolerance within 0.005
- Direct-fit design
Fade and cooling basics
Brake fade happens when friction material and rotor get too hot to grip consistently, usually on long downhill runs, repeated stops while towing, or hard use off road. Drilled holes add surface area and let gases and heat escape, while slots help clear debris that can otherwise make pedal feel inconsistent. Neither feature replaces good pads or proper cooling in the first place.
On a truck that tows or carries heavy loads, rotor wear and pad choice matter as much as the rotor design. A cross-drilled face can wear pads faster if the pad compound is very hard, so matching pad material to the rotor is worth planning before the job. Fluid condition also affects how well the system resists heat, so check it at the same service.
- Check pad thickness on both sides of each axle
- Flush brake fluid if it has darkened or is due for service
- Look for cracks radiating from the drilled holes
- Keep brake dust away from wheel sensors during cleaning
Specifications
| Brand | Power Stop |
|---|---|
| Part number | AR8596XPR |
| UPC | 792088553270 |
| Type | Slotted and cross drilled |
| Position | Front |
| Coating | Coated |
| Finish | Silver zinc plated |
| Material | G3000 grade casting |
| Machining | Tru-Cast precision machined, mill balanced |
| Tolerances | Run out within 0.0015; DTV within 0.005 |
| Drill holes | Beveled and precision drilled |
| Slots | Rounded slots sweep water, gas and dust |
| Cooling | The drilled holes help keep rotors up to 180°F cooler. |
| Line | Evolution |
| Fit | Direct fit |
Vehicle fitment
It fits 2004–2008 Ford F-150 (FX4, Harley-Davidson Edition, King Ranch, Lariat, STX, THE 60TH ANNIVERSARY EDITION, XL, XLT) and 2006–2008 Lincoln Mark LT (Base).
AR8596XPR is a front rotor, and F-150 years after 2008 are not on its list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Replace rotors in left and right pairs, and bed in new pads before regular driving.









