Overview
The Power Stop Brake Rotor AR8793XPR is a drilled and slotted, coated Evolution brake rotor for the 2006–2010 Jeep Commander (XK), the 2005 Jeep Grand Cherokee (WJ) and the 2006–2010 Jeep Grand Cherokee (WK). It is made from G3000 grade cast and is a direct fit.
Cross drilled holes help keep rotors up to 180°F cooler, and the rounded slots sweep away water, gas and dust to keep a clear contact patch between the pad and the rotor. The rotor is precision machined with Tru-Cast technology, mill balanced and silver zinc plated to help resist rust. Confirm whether your axle needs the front or rear position before ordering.
Key features
- Slotted and cross drilled design
- Cross drilled holes help keep rotors up to 180°F cooler.
- Rounded slots sweep away water, gas and dust
- Precision machined using Tru-Cast technology
- Mill balanced
- Silver zinc plated to help resist rust
- G3000 grade cast
- Rotor run out is within 0.0015 and DTV tolerance within 0.005
Choosing a rotor for your axle
Rotors wear with pad contact, heat and moisture, so matching the rotor to the correct axle matters as much as matching the vehicle. Before ordering, confirm whether the front or rear position is needed for your installation. Rotors are usually replaced in axle pairs so both sides wear and grip evenly.
Drilled and slotted rotors are designed to shed heat, water and debris, but they can also wear pads faster during hard use. Pair them with pads suited to your driving, and bed in the new pads and rotors using the break-in steps before heavy stops. A clean hub face and a flat seat help the rotor run true.
- Confirm front or rear position for your axle
- Replace rotors in axle pairs
- Match pad compound to your driving style
- Clean the hub face before fitting
- Check the rotor for its minimum thickness marking
Specifications
| Brand | Power Stop |
|---|---|
| Part number | AR8793XPR |
| UPC | 792088554390 |
| Product type | Disc brake rotor (Evolution drilled and slotted) |
| Rotor type | Slotted and cross drilled |
| Material | G3000 grade cast |
| Coating | Rotors coated; silver zinc plated |
| Location and position | Location: front. Position: rear. Confirm which axle your vehicle needs before ordering. |
| Rotor run out | Within 0.0015 |
| DTV tolerance | Within 0.005 |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2006–2010 Jeep Commander (XK) in 65th Anniversary Edition, Base, Limited, Overland and Sport trims, the 2005 Jeep Grand Cherokee (WJ) in Laredo and Limited trims, and the 2006–2010 Jeep Grand Cherokee (WK) in 65th Anniversary Edition, Laredo, Limited and Overland trims.
Within the WJ generation only the 2005 model year is listed, so 1999–2004 Grand Cherokee models are not covered. The 2011 and later Grand Cherokee models are also not listed. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Brake components are safety-critical. Have a qualified technician install them, follow the break-in procedure, and test braking at low speed in a safe area before normal driving.
Tighten all fasteners to the torque values for your vehicle. Support the vehicle on jack stands or a lift on level ground, never on a jack alone, and re-check fastener tightness after the first miles of driving.
Replace rotors in axle pairs for even braking, fit matching new pads, and clean the hub face before installation.
What’s included
A brake rotor. Confirm whether you need a single rotor or a pair before ordering.
Not included: brake pads, hardware, and calipers.









