Overview
The Power Stop AR82112XPR is a front slotted and cross-drilled brake rotor for the 2006–2010 Ford Explorer, the 2007–2010 Explorer Sport Trac and the 2006–2010 Mercury Mountaineer.
This Evolution rotor pairs slotting with cross drilling. The slots clear gas, dust and water from the pad contact patch, while beveled, precision-drilled holes help keep rotor temperatures lower under hard braking, by up to 180°F.
Key features
- Drilled holes aimed at lower rotor temperatures, rated by Power Stop at up to 180°F cooler
- Slotted face that clears gas, water and dust from the pad contact area
- Made with Power Stop’s Tru-Cast process and precision machining
- Rotor runout held to 0.0015, with DTV tolerance within 0.005
- Evolution series rotors are mill balanced
- Silver zinc plated to shield against rust
- Cast to G3000 grade
- Helps reduce brake fade
- The rotors are finished to look right behind factory or custom wheels.
Before you replace a rotor
Rotors wear unevenly when pads are worn or when braking is heavy on one side, so a new rotor works best when the pads and hardware are in good shape. Before fitting, clean the hub face and check for rust scale that can push the rotor off true. Torque the lug nuts in a star pattern, and recheck them after the first few drives as the mating surfaces settle.
Bedding in new pads and rotors takes a few moderate stops rather than one hard stop. Look for pulsation, grinding or a pedal that feels soft, as these point to a worn pad, a glazed surface or a warped disc. Drilled and slotted rotors can crack at the edges of holes over time, so inspect them at each pad change. Replace the rotor when it is below its minimum thickness or when the braking surface shows deep scoring.
Specifications
| Brand | Power Stop |
|---|---|
| Part number | AR82112XPR |
| UPC | 792088551320 |
| Product line | Power Stop Evolution |
| Position | Front |
| Rotor type | Slotted and cross drilled |
| Material | G3000 grade cast |
| Finish | Silver zinc plated |
| Runout | Within 0.0015 |
| DTV tolerance | Within 0.005 |
| Balance | Mill balanced |
| Coating | Coated |
| Cooling holes | Beveled, precision-drilled cross holes; Power Stop says they keep rotors up to 180°F cooler |
| Slots | Rounded slots that sweep a clear contact patch between pad and rotor |
| Manufacturing | Tru-Cast technology, precision machined |
| Fade | The rotor helps reduce fade. |
| Appearance | The silver zinc finish suits both factory and custom wheels. |
| Plating note | All drilled and slotted rotors except hub and rotor assemblies are silver zinc plated |
| Fit | Direct fit |
Vehicle fitment
The AR82112XPR front rotor fits the 2006–2010 Ford Explorer (Eddie Bauer, Limited, XLS and XLT), the 2007–2010 Ford Explorer Sport Trac (Limited and XLT) and the 2006–2010 Mercury Mountaineer (Base, Convenience, Luxury and Premier).
Listed vehicles:
- 2006–2010 Ford Explorer (Eddie Bauer, Limited, XLS, XLT)
- 2007–2010 Ford Explorer Sport Trac (Limited, XLT)
- 2006–2010 Mercury Mountaineer (Base, Convenience, Luxury, Premier)
Explorer model years before 2006 are not on the AR82112XPR list. Confirm your vehicle’s year, model and trim before ordering.









