Overview
The Power Stop K3167-36 is a front Z36 Truck and Tow brake kit for the 2010–2018 Ford Expedition and F-150 and the 2010–2018 Lincoln Navigator, with slotted and cross-drilled rotors and metallic pads.
Power Stop pitches the Z36 pad as high-friction for wet, hot and hilly roads, and the kit is supplied without calipers. Matching pads and rotors in one box is the idea behind Power Stop’s kit approach, which the company describes as a way to get a big brake feel without a big brake conversion. Power Stop also claims low noise and dust alongside the extra bite.
Key features
- Z36 Truck and Tow pads use a high-friction metallic compound
- Rotors are both slotted and cross-drilled
- Power Stop aims this kit at heavy-duty braking and trailer or load hauling
- Direct fit, so no modification is described
- Rotors arrive coated
- No calipers and no brake lines are included
Heavy-duty trailer work
Full-size trucks used for hauling or trailer work put heavy, repeated loads on the front brakes, and the friction material and rotors take much of that heat. Pads designed for heavy-duty use usually need a short bedding process so the friction layer transfers properly onto the rotor face. Driving with a trailer on long downhill grades is where the front brakes do the most work, so pad condition matters.
Reusing the existing calipers means they should be checked before the new pads go in. Look at slide pin movement, piston travel and any fluid seepage at the hose connections. A caliper that does not release fully can overheat the new rotors and pads, so repair any sticking before the vehicle goes back to work.
- Check slide pins and piston movement before fitting
- Bed in pads before towing heavy loads
- Watch for fluid seepage at hose connections
Specifications
| Brand | Power Stop |
|---|---|
| Part number | K3167-36 |
| UPC | 700007036491 |
| Brake position | Front |
| Rotor type | Slotted and cross-drilled |
| Brake pads | Z36 Truck and Tow high-friction metallic |
| Rotor coating | Coated |
| Calipers | Not included |
| Brake lines | Not included |
| Fit type | Direct fit |
Vehicle fitment
The kit fits the 2010–2018 Ford Expedition, the 2010–2017 Expedition EL, the 2018 Expedition Max, the 2010–2018 Ford F-150, the 2010–2018 Lincoln Navigator and the 2010–2018 Navigator L. It is a front-axle kit.
Confirm fit for your vehicle’s year, model and trim before ordering, especially for Super Duty trucks and Expeditions outside 2010–2018. The rear axle needs a different kit.
Installation notes
The kit is a direct-fit design that replaces the original rotors and pads. Because it comes without calipers, the calipers already on the truck are reused. Fit both wheels on an axle at the same time.
What’s included
A set of slotted and cross-drilled rotors with Z36 metallic pads.
Not included: calipers and brake lines.









