Overview
The Power Stop K2069-36 is a Z36 Truck and Tow front brake kit with drilled and slotted rotors and Z36 pads. It fits 2007-2018 full-size Cadillac, Chevrolet and GMC trucks and SUVs, and it does not include calipers.
The Z36 Truck and Tow kit is built for heavy-duty braking on vehicles that tow or haul. It pairs slotted and cross-drilled coated rotors with Z36 high-friction metallic pads. Brake lines are not included. The kit is designed to improve braking in wet, hot and hilly conditions and when towing at max weight.
Key features
- Z36 Truck and Tow drilled and slotted brake kit, without calipers
- Slotted and cross-drilled rotors
- Power Stop Z36 high-friction metallic pads
- Rotors are coated
- Front position
- Does not include brake lines
- Direct fit
Towing and hauling checks
Towing and hauling place more heat into the front brakes, so pad and rotor condition matters more than on a light vehicle. Check the pads for even wear and the rotors for heat cracks before a long trip. A heavy-duty front kit works best when the rear brakes, brake fluid and trailer brake controller settings are also in order.
Pads made for high friction can take longer to reach full bite when cold, so allow a few gentle stops before relying on them. Slotted and cross-drilled rotors help clear debris and water, which is useful on wet, hilly roads. Replace the rotors and pads together, because mixing new and worn parts on one axle can cause uneven pull under load.
- Check brake fluid before a long tow
- Inspect front caliper slides for smooth movement
- Re-check wheel fasteners after the first trip
- Plan longer stopping distances when loaded
Specifications
| Brand | Power Stop |
|---|---|
| Part number | K2069-36 (also shown as PSTK2069-36) |
| UPC | 792088565938 |
| Product type | Disc brake pad and rotor kit |
| Series | Z36 Truck and Tow |
| Rotor type | Slotted and cross drilled |
| Rotor coating | Rotors coated |
| Pads | Z36 high-friction metallic |
| Position | Front |
| Calipers | Not included |
| Brake lines | Not included |
| Fitment type | Direct fit |
Vehicle fitment
The manufacturer fitment list for the Power Stop K2069-36 covers these vehicles: 2008–2018 Cadillac Escalade and Escalade ESV; 2008–2013 Cadillac Escalade EXT; 2008–2013 Chevrolet Avalanche; 2007–2018 Chevrolet Silverado 1500; 2015–2018 Chevrolet Suburban; 2008–2013 Chevrolet Suburban 1500; 2008–2018 Chevrolet Tahoe; 2007–2018 GMC Sierra 1500; 2008–2018 GMC Yukon; 2015–2018 GMC Yukon XL; and 2008–2014 GMC Yukon XL 1500. Trim levels vary by model and are in the stored fitment list.
Fit is limited to the model years above. Confirm fit for your vehicle’s year, model and trim before ordering, especially for heavy-duty 2500 and 3500 trucks.
Installation notes
Brakes are a safety system, so professional installation is the safer choice. Tighten all fasteners to the torque values in your service manual.
- Inspect the related brake hardware, hoses and fluid while the brakes are apart.
- Bed in new pads and rotors gradually before towing heavy loads.
- Test the brakes at low speed in a safe area before returning to normal driving.
What’s included
- Front drilled and slotted rotors
- Power Stop Z36 pads
- A kit of rotors and pads, without calipers or brake lines
Not included: Calipers and brake lines are not included. The pads are Power Stop Z36 high-friction metallic.









