Overview
The Power Stop K1887 is a front and rear performance brake upgrade kit with silver zinc plated cross-drilled and slotted rotors and Z16 ceramic scorched brake pads. No make, model or year is tied to the K1887, so fit must be confirmed separately before ordering.
The kit covers both axles and includes coated rotors, a direct fit and no brake lines. A cross-drilled rotor has holes through its friction face and a slotted rotor has grooves across it, and the K1887 uses both patterns. Several similar Z16 kits exist, so compare part numbers rather than titles. The coating is a rotor feature, and the kit is rotors and pads only.
Key features
- Front and rear parts in a single box.
- Rotors are silver zinc plated and cross drilled and slotted.
- Z16 ceramic scorched pads are the pad type.
- It is a direct fit kit.
- Brake lines are excluded.
Before you buy
Front and rear kits change both axles at once, so plan the job around every wheel position. Pads and rotors wear at different rates on each end of a vehicle, and a worn rear set can make a fresh front job feel uneven. Replacing both axles together keeps friction and rotor thickness consistent across the car.
Ceramic pads run quieter and leave less dust than many semi-metallic compounds, though they can feel softer when cold. Drilled and slotted rotors help clear gases and water from the friction surface, but the holes and grooves also add some wear to the pads. Expect a short bed-in period before the brakes reach full performance.
Before installing, inspect the calipers, slide pins and existing brake lines. Replacing rotors without checking hardware often leaves pulsation or uneven wear. Keep the brake fluid topped up and re-check lug nut torque after the first few stops.
- Check rotor thickness against the minimum stamped on the old rotor
- Clean hub faces before fitting new rotors
- Re-check lug nut torque after the first stops
Specifications
| Brand | Power Stop |
|---|---|
| Part number | K1887 |
| UPC | 792088530387 |
| Product type | Performance brake upgrade kit |
| Brake position | Front and rear |
| Rotor type | Slotted and cross drilled, silver zinc plated, coated |
| Brake pads | Z16 ceramic scorched brake pads |
| Brake lines | Not included |
| Fitment type | Direct fit |
Vehicle fitment
No make, model or year is tied to the K1887. Check that your vehicle’s year, model and trim match before buying.
No vehicles are named, so none can be ruled in or out. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The K1887 involves both axles, so budget for all wheel positions. Rotors and pads of each axle are replaced together, and the vehicle’s existing brake lines stay in use.
What’s included
The K1887 contains silver zinc plated cross-drilled and slotted rotors and Z16 ceramic scorched brake pads for the front and rear axles.
Not included: Brake lines.









