Overview
The Power Stop 1-Click Extreme Truck and Tow Brake Kit K6268-36 is a front and rear drilled and slotted brake rotor and pad kit for the 2012–2018 Ford F-150. It is the Z36 Truck and Tow kit without calipers and does not include brake lines.
The kit pairs slotted and cross-drilled rotors with Z36 high-friction metallic pads, designed to improve braking in wet, hot or hilly conditions and while towing at maximum weight. The rotors are coated, and the kit is a direct fit for the trims shown above.
Key features
- Slotted and cross-drilled rotors
- Z36 high-friction metallic pads
- Covers front and rear brake positions
- Coated rotors
- Built for truck and tow use
- Does not include calipers or brake lines
Towing and heavy-duty braking
Towing at or near maximum weight puts far more heat into the brakes than everyday driving does. Pads and rotors that run hot can fade, so a heavy-duty setup works best when the rest of the braking system is in good order. Check brake fluid condition, hose condition and caliper operation before a long tow, since a weak link elsewhere limits what the new pads and rotors can deliver.
Metallic pads generally tolerate higher heat than standard organic pads, but they can be harder on rotors and may be noisier when cold. Coated, drilled and slotted rotors help shed gas and water, yet they also need regular inspection for cracks around the drilled holes. Replace worn pads before they reach the wear indicator, and avoid grinding a rotor below its stamped minimum thickness.
- Inspect brake fluid and replace it on the schedule the vehicle requires
- Check the trailer brake controller setup after any brake work
- Re-check rotor surfaces for hot spots or heat cracks after long grades
Specifications
| Brand | Power Stop |
|---|---|
| Part number | K6268-36 |
| UPC | 700007036521 |
| Product type | Disc brake pad and rotor kit (Z36 Truck and Tow) |
| Rotor type | Slotted and cross drilled |
| Pad type | Z36 high-friction metallic |
| Rotors coated | Yes |
| Position | Front and rear |
| Brake lines included | No |
| Calipers included | No |
| Fitment type | Direct fit |
Vehicle fitment
The kit fits the 2012–2018 Ford F-150 in the FX2, FX4, Harley-Davidson Edition, King Ranch, Lariat, Limited, Platinum, Police Responder, Raptor, SSV, STX, SVT Raptor, XL and XLT trims.
Years outside 2012–2018 and other Ford trucks are not covered. The kit does not include calipers. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Brake components are safety-critical. Have a qualified technician install them, follow the break-in procedure, and test braking at low speed in a safe area before normal driving.
Tighten all fasteners to the torque values required for this kit. Support the vehicle on jack stands or a lift on level ground, never on a jack alone, and re-check fastener tightness after the first miles of driving.
Replace or inspect related hardware as the manufacturer instructs, and bleed the brake system if the hydraulic circuit was opened.
New pads and rotors need a break-in period, so avoid hard stops and heavy towing until the bed-in process is complete.
What’s included
A set of slotted and cross-drilled coated rotors and Z36 high-friction metallic pads for the front and rear positions.
Not included: calipers and brake lines.









