Overview
The Power Stop K6271 is a 1-Click drilled and slotted brake kit with silver zinc plated cross-drilled and slotted rotors and Z16 ceramic scorched brake pads. Confirm fit for your vehicle’s year, model and trim before ordering.
Position is unclear: the K6271 may be a rear kit or a front and rear kit, so confirm which axles it covers before ordering. Brake lines are not included. Cross-drilled rotors have holes through the friction face, and slotted rotors have grooves cut across it. The K6271 uses both patterns, so check the rotor fit against your current brakes before installing.
Key features
- Cross-drilled and slotted rotors with silver zinc plating.
- Z16 ceramic scorched brake pads in the same kit.
- The rotors are coated and the fitment type is direct fit.
- Brake lines are not part of the K6271.
- Position is rear in the summary and front and rear in the attributes.
Confirming axle coverage
Axle coverage decides which parts belong in the box, so settle it before any wheel comes off. Compare the old rotor hat height, bolt count and mounting face with the new rotor, and check that the caliper bracket matches the axle being serviced. A rear rotor and a front rotor can look similar yet fit different hubs, which makes a physical check worthwhile.
Cross-drilled and slotted rotors remove gas and water from the pad face, but they also collect pad material and dust in the slots. Clean the rotor face before installing and inspect the drilled holes for cracking. Replace pads and rotors together on each axle so the new friction surfaces wear in evenly.
- Count the parts in the box against what you removed
- Confirm the brake line routing stays unchanged
- Check rotor thickness before fitting
Specifications
| Brand | Power Stop |
|---|---|
| Part number | K6271 |
| UPC | 700006899561 |
| Product type | 1-Click drilled and slotted brake kit |
| Brake position | Rear in the product summary; front and rear in the attribute table |
| Rotor type | Slotted and cross drilled, silver zinc plated, coated |
| Brake pads | Z16 ceramic scorched brake pads |
| Brake lines | Not included |
| Fitment type | Direct fit |
Vehicle fitment
Confirm fit against your year, model and trim, and confirm which axles the kit covers before ordering. The kit is direct fit, so the rotor and pad shape should match the parts you are replacing.
No vehicles are listed, so none can be ruled in or out. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Before installing the K6271, confirm whether the box holds rear parts only or both axles, given the conflicting position details. Replace rotors and pads together on each axle, and reuse the existing brake lines.
What’s included
The K6271 contains silver zinc plated cross-drilled and slotted rotors and Z16 ceramic scorched brake pads.
Not included: Brake lines.








