Overview
The Power Stop K5578-36 is a rear Extreme Truck and Tow brake kit for the 2010–2012 Ford F-250 Super Duty and F-350 Super Duty.
Drilled and slotted rotors and Z36 metallic pads make up the kit for the rear axle. Power Stop leaves out calipers and brake lines. Kits of this kind suit trucks that spend time under load, since the Z36 pad is the Truck and Tow option in Power Stop’s range. Power Stop says its kits bite harder than other leading brands while staying quiet and low in dust.
Key features
- Heavy-duty brake kit for trucks that tow
- Cross-drilled and slotted rotors paired with Z36 metallic pads
- The kit is intended to improve braking when wet, hot, hilly or hauling at maximum weight.
- Direct-fit pad and rotor set
- Calipers are not part of this kit
Before you tow with upgraded brakes
Trucks that tow rely on their brakes more than most vehicles, because a trailer or a full payload must be slowed on every descent and every stop. Brake fade is the common problem: pads and rotors heat up on long grades, and friction drops. Cross-drilled and slotted rotors are designed to shed heat and gas more quickly, which helps when repeated stops follow each other.
Before fitting an axle kit, inspect the rest of the system. Brake hoses, calipers and the master cylinder should be checked for leaks, swelling or wear. Tires, wheel bearings and the trailer brake controller also affect how the truck stops, so check them while the wheels are off.
- Check brake fluid condition before and after installation
- Bed in new pads gradually with light stops first
- Inspect rotors for cracks and heavy scoring at each pad change
- Replace pads on both ends together when either end is worn
Specifications
| Brand | Power Stop |
|---|---|
| Part number | K5578-36 |
| UPC | 700006899011 |
| Brake position | Rear |
| Rotor type | Slotted and cross-drilled |
| Brake pads | Z36 Truck and Tow high-friction metallic |
| Rotor coating | Coated |
| Calipers | Not included |
| Brake lines | Not included |
| Fit type | Direct fit |
Vehicle fitment
It fits the 2010–2012 Ford F-250 Super Duty and 2010–2012 Ford F-350 Super Duty.
Super Duty trucks from 2013 on and the 2009 F-250 are not covered. It supplies the rear axle only. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The rotors and pads in this kit take the place of the originals on the axle listed, and the calipers on the truck are retained. Brake lines are not supplied. Work on both sides of the axle together, since mixing old and new parts can pull the truck to one side.
What’s included
Rotors (slotted and cross-drilled) and Z36 Truck and Tow pads.
Not included: calipers and brake lines.









