Overview
The Power Stop K5487-36 is a rear Extreme Truck and Tow brake kit for the 2009–2018 Ram 2500 and the 2009–2012 Ram 3500.
Rear rotors are slotted and cross-drilled and the pads are Z36 high-friction metallic. As with the other Truck and Tow kits, no calipers are supplied. Kits of this kind suit trucks that spend time under load, since the Z36 pad is the Truck and Tow option in Power Stop’s range. Power Stop says its kits bite harder than other leading brands while staying quiet and low in dust.
Key features
- Heavy-duty brake kit for trucks that tow
- Cross-drilled and slotted rotors paired with Z36 metallic pads
- The kit is designed to improve braking when wet, hot, hilly or hauling at maximum weight.
- Direct-fit pad and rotor set
- Calipers are not part of this kit
Brake heat on towing trucks
Towing puts sustained heat into the brake system, especially on long grades. Pads and rotors can glaze or fade if the friction surface overheats, so the choice of compound matters as much as rotor design. Rear brakes on a heavy truck can carry a large share of the load when a trailer is attached.
Calipers are not part of this kit and stay on the truck. Inspect the slide pins, boots and piston movement when the pads are changed, since a sticking caliper can overheat a single wheel and wear new parts unevenly.
- Check caliper slide pins for free movement
- Replace torn caliper boots before they let in dirt
- Use fresh brake fluid if the system has been opened
- Watch for pulling toward one side after the job
Specifications
| Brand | Power Stop |
|---|---|
| Part number | K5487-36 |
| UPC | 700007036511 |
| Brake position | Rear |
| Rotor type | Slotted and cross-drilled |
| Brake pads | Z36 Truck and Tow high-friction metallic |
| Rotor coating | Coated |
| Calipers | Not included |
| Brake lines | Not included |
| Fit type | Direct fit |
Vehicle fitment
The K5487-36 rear kit covers the 2009–2010 Dodge Ram 2500 and 3500, the 2011–2018 Ram 2500, and the 2011–2012 Ram 3500.
It covers the rear axle only. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
The rotors and pads in this kit take the place of the originals on the axle listed, and the calipers on the truck are retained. Brake lines are not supplied. Work on both sides of the axle together, since mixing old and new parts can pull the truck to one side.
What’s included
Rotors (slotted and cross-drilled) and Z36 Truck and Tow pads.
Not included: calipers and brake lines.









